F100-pw-100 (f-15a/b/c/d) Aircraft Engine Parts

End item NSN parts page 1 of 38
Part Number
NSN
NIIN
0.4375-14UNC-2AX1.50 CRES Hexagon Head Cap Screw
006602832
00-255-9504 Voltage Sensitive Resistor
002559504
000-8002-381 Pipe Elbow
001377875
000-8006-266 Pipe Elbow
001377875
000-8006-395 Pipe To Tube Straight Adapter
005117989
000-8006-940 Electr Receptacle Connector Body
000329566
000-8008-503 Electrical Dummy Load
010807338
00003123 Electrical Connector Backshell
010475230
00008-447 O-ring
005796495
0001-0002R O-ring
002483838
0001229 O-ring
005796495
0001265 Pipe Nipple
001961498
0001273 Pipe Nipple
001961498
000216EB O-ring
011192008
000216EBCP O-ring
011192008
0005319685 Conductor Splice
006659580
00054297 Tube Coupling Nut
009028990
001675146
00205-0246 Pipe To Tube Straight Adapter
004418700
00239-025 F70 O-ring
003247730
Page: 1 ...

Engine, Aircraft, F100-pw-100 (f-15a/b/c/d)

Picture of F100-pw-100 (f-15a/b/c/d)  Aircraft Engine

The Pratt & Whitney F119 (company designation PW5000) is an afterburning turbofan engine developed by Pratt & Whitney for the Lockheed Martin F-22 Raptor advanced tactical fighter.

The engine delivers thrust in the 35,000 lbf (160 kN) class, and is designed for supersonic flight without the use of afterburner (supercruise). Delivering almost 22% more thrust with 40% fewer parts than conventional, fourth-generation military aircraft engine models, the F119 allows sustained supercruise speeds of up to Mach 1.8. The F119's nozzles incorporate 2D thrust vectoring technology. These nozzles direct the engine thrust ±20° in the pitch axis to give the F-22 enhanced maneuverability.

The F119 derivative, the F135, produces 40,000 lbf (180 kN) of thrust for the Lockheed Martin F-35 Lightning II.

The F119 resulted from the Joint Advanced Fighter Engine (JAFE) program in the early 1980s aimed at supplying the powerplant for the Air Force's Advanced Tactical Fighter (ATF). Detailed design of Pratt & Whitney's submission, designated internally as PW5000, began when the JAFE request for proposals (RFP) was released in May 1983. Advances in engine technology, such as those from the Integrated High Performance Turbine Engine Technology (IHPTET) program, allowed the design to do more work with fewer stages, with the PW5000 having only 6 compressor stages compared to the F100's 10 compressor stages. The high pressure and low pressure turbines were single stage and counter-rotating, thus shortening the engine and saving weight. The fan and compressor stages were to use integrally bladed rotors (IBR) to reduce weight and cost and improve performance. The combustor, designated Floatwall, eliminates welds to mitigate crack growth due to thermal cycling. This technology allows the engine to achieve very high core temperatures to meet the requirement for high specific thrust for supercruising. The original RFP called for maximum thrust in the 30,000 lbf class.

Compare Now »
Clear | Hide