MIL-STD-202 Spec. Parts

Page 1 of 2
NSN 5325-01-624-2736 Nonmetallic Grommet

Material Spec:

Stainless steel has a thermosetting epoxy finish that is lime green color number 14553 per fed-std-595. Elastomer cushion flammability rating per mil-std-202, method 111a.

Color:

Green metallic parts

NSN 5325-01-624-2728 Nonmetallic Grommet

Material Spec:

Stainless steel has a thermosetting epoxy finish that is lime green color number 14553 per fed-std-595. Elastomer cushion flammability rating per mil-std-202, method 111a.

Color:

Green metallic parts

NSN 5905-01-614-7067 Film Fixed Resistor

Material Spec:

Mil-std-202 standard (includes industry or association standards, individual manufactureer standards, etc.).

NSN 5905-01-602-4272 Film Fixed Chip Resistor

Material Spec:

Mil-std-202-81349 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). And eia-554-1-55342 standard (includes industry or association standards, individual manufactureer standards, etc.).

NSN 5920-01-599-5211 Cartridge Fuse

Material Spec:

Mil-std-202 government standard

NSN 5925-01-575-1503 Circuit Breaker

Material Spec:

Mil-std-202 methods 101,106,204 and 213

NSN 5325-01-565-9041 Nonmetallic Grommet

Material Spec:

Mil-std-202. Method 111a mil std single treatment response grommet

Color:

Gray grommet

NSN 5930-01-561-0553 Thermostatic Switch

Material Spec:

Single pole,single throw,hermetic seal,resists saltspray,environmental (mil-std-202),qualified to requirements of mil-prf-24236

NSN 5950-01-554-5761 Radio Frequency Coil

Material Spec:

Mil-std-202 government specification

NSN 5950-01-545-5283 Electrical Coil

Material Spec:

Mil-std-202 standard (includes industry or association standards, individual manufactureer standards, etc.).

NSN 5925-01-517-7229 Circuit Breaker

Material Spec:

Mil-std-202 standard (includes industry or association standards, individual manufactureer standards, etc.).

NSN 5325-01-479-5331 Nonmetallic Grommet

Material Spec:

Metal coating is thermosetting epoxy, color lime green per fed-std-595, color number 14553,stainless steel is 1/4 hard 300 series per ams 5903, ams5907, or ams5310, elstomer cushion, shore a, 46 durometer, flammability per mil-std-202, method 111a, unit length 25 feet or 100 feet

Color:

Gray plastic parts

NSN 5325-01-294-4374 Metallic Eyelet

Material Spec:

Mil-std-202,method 208 mil std single treatment response overall

Color:

Any acceptable overall

NSN 5325-01-294-4373 Metallic Eyelet

Material Spec:

Mil-std-202,method 208 mil std single treatment response overall

Color:

Any acceptable overall

NSN 5999-01-242-6135 Electrical Contact

Material Spec:

Mil-std-202 mil std single treatment response body and contact

Compare Now »
Clear | Hide