Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Clamp, heat exchanger
NSN
National Stock Number:
TXT
Description:
Loop Clamp
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.70 inches and 0.74 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.023 inches and 0.027 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mrap - unique nsn - maxxpro cat i
MRC:
Indicates the type of fastening device provided.AXWJ
Fastening Device Type:
T-bolt
MRC:
The length of a straight line which passes through the center of the loop,and terminates at the inside circumference.BZTN
Loop Inside Diameter:
Between 4.06 inches and 4.56 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Trunion and washer material: steel, zinc plated yellow dichromate; compression spring material: steel, zinc plated; t-nut: 1/4"-28 unf-2b; t-bolt: 1/4"-28 unf-2a and 4.25" long; dimension measured with clamp installed on diameter at 65 pounds torque
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel bolt
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 201 or steel comp 301 or steel comp 302 or steel comp 304 band
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 201 or steel comp 301 or steel comp 302 or steel comp 304 pin/stud
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel nut
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Dichromate zinc bolt
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Dichromate zinc nut
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
T-bolt
