Part Number 364010-11

Metal Tube Assembly
Stock Availability  condition code chart

Part number 364010-11 is in stock in the following quantities and conditions.

  • NE: 1
  • SV: 11
  • NS: 2
  • AR: 1
  • OH: 1

Note: Availability of this item was last updated 06/30/2023 and may have changed since then. Request a quote for up to date pricing and availability.

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Part Number
DEMIL
Shelf Life
UOM
NIIN
Part:
364010-11
Demil:
Yes - DEMIL/MLI
Shelf Life:
UOM:
NIIN:
007319716

Part Information
Flight safety critical

NSN
National Stock Number:
4710-00-731-9716 4710007319716
TXT
Description:
Metal Tube Assembly
INC
INC
Item Name Code:
21989
INC
COM
Compliance:
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.035 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b first end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand first end
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
1.850 inches second end
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4 second end
MRC:
The number of mating ends provided with the item which are designed to accommodate another connector.AFQW
Mating End Quantity:
1 first end
MRC:
The number of mating ends provided with the item which are designed to accommodate another connector.AFQW
Mating End Quantity:
1 second end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Gc-130 series aircraft
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.265 inches second end and 0.273 inches second end
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.265 inches and 0.273 inches second end
MRC:
The element,compound,or mixture of which the tubing is fabricated,excluding any surface treatment.AHSA
Tubing Material:
Steel, corrosion resisting
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end connection.AJFX
End Connection Style:
Plain second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end connection.AJFX
End Connection Style:
Swivel nut with compression sleeve first end
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
37.0 first end
MRC:
The physical configuration of the item.ARJD
Design Form:
Prebent
MRC:
The length of a straight line which passes through the center of the tube,and terminates at the outside circumference.BBYQ
Tube Outside Diameter:
1.000 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 first end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.312 inches first end
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting second end
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel second end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unj first end

Similar Metal Tube Assemblies

« Pipe, Tube and Rigid Tubing Catalog
Compare Now »
Clear | Hide