Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Min.Thickness of outside shell .125 in{ max.Exhaust outlet back pressure 5.5 hg at 800 rpms{ jacket water flow 77 gals per min. At 2300 rpms
NSN
National Stock Number:
TXT
Description:
Exhaust Muffler
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
32.000 inches
MRC:
A narrative description of the type of inlet connection.ACQW
Inlet Connection Type:
Flange 1st outlet
MRC:
A narrative description of the type of inlet connection.ACQW
Inlet Connection Type:
Flange single inlet
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Between 17.750 inches and 18.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Used on detroit diesel model 6v-53 aboard 44 ft coast guard vessels
MRC:
The length of a straight line which passes through the center of the outlet,and terminates at the inside circumference.AJLW
Outlet Inside Diameter:
6.000 inches single inlet
MRC:
Indicates the design type of the item.APGF
Design Type:
Wet
MRC:
Indicates the type of coolant used with the item.ARNA
Coolant Type:
Water
MRC:
The basic design of the muffler.ARND
Muffler Design:
Multipass
MRC:
The number of tubes included on the item.ARNF
Tube Quantity:
4
MRC:
The physical configuration of the body.ARNG
Body Shape:
Round
MRC:
The position in which the item is designed to operate.ARNH
Operating Position:
Any acceptable
MRC:
The location of the inlet.ARNJ
Inlet Location:
Equally spaced on bottom convex 10.500 ins. C to c single inlet
MRC:
A measurement of the longest dimension of the inlet projection,in distinction from width.ARNK
Inlet Projection Length:
2.000 inches 1st outlet
MRC:
A measurement of the longest dimension of the inlet projection,in distinction from width.ARNK
Inlet Projection Length:
2.000 inches single inlet
MRC:
The physical configuration of the inlet flange.ARNL
Inlet Flange Shape:
Round 1st outlet
MRC:
The physical configuration of the inlet flange.ARNL
Inlet Flange Shape:
Round single inlet
MRC:
The type and number of inlet flange mounting provisions provided.ARNM
Inlet Flange Mounting Provision And Quantity:
8 holes 1st outlet
MRC:
The type and number of inlet flange mounting provisions provided.ARNM
Inlet Flange Mounting Provision And Quantity:
8 holes single inlet
MRC:
The length of a straight line passing through the center of an inlet flange mounting hole,and terminating at the circumference.ARNN
Inlet Flange Mounting Hole Diameter:
0.750 inches single inlet
MRC:
The spacing of the inlet flange mounting provision.ARNT
Inlet Flange Mounting Provision Spacing:
7.1/2 in. C to c dim. Of bolt holes single inlet
MRC:
The length of a straight line which passes through the center of the inlet,with terminated points on the outside circumference.ARSQ
Inlet Outside Diameter:
9.000 inches single inlet
MRC:
The length of a straight line which passes through the center of the inlet,with terminated points on the inside circumference.ARTE
Inlet Inside Diameter:
6.000 inches single inlet
MRC:
A narrative description of the type of outlet connection.ARTH
Outlet Connection Type:
Unthreaded single inlet
MRC:
The location of the outlet.ARTJ
Outlet Location:
Located on bottom vertical centered 90 degrees from inlets single inlet
MRC:
A measurement of the longest dimension of the outlet projection,in distinction from width.ARTK
Outlet Projection Length:
4.000 inches single inlet
MRC:
The length of a straight line which passes through the center of the outlet,with terminated points on the outside circumference.ARWA
Outlet Outside Diameter:
6.625 inches single inlet
MRC:
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.CBME
Cubic Measure:
5.000 cubic feet
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
