Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Has additional 0.062 in. Radius groove starting 0.095 in. From bottom of head
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Pan no. 2 (r1 not required in item description)
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.185 inches and 0.187 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
0.340 inches
Undercut Diameter:
Between 0.125 inches and 0.130 inches
Under Head Length:
0.719 inches
Undercut Radius:
0.031 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
0.076 inches
Distance From Centerline Of Hole To End Of Pin:
0.087 inches
First End Taper Length:
0.046 inches
MRC:
A measurement of the longest dimension of the grip,in distinction from width.ANEE
Grip Length:
0.371 inches
First End Taper Angle:
15.0 degrees
Pin Head Diameter:
0.312 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.046 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/3 t3511 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
760-75148-3 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
