Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Both ends internal teeth; both 0.032 in. By 45 degrees seat; slot on either side of bdy, 0.375 by 1.674; first end has ridge 0.28 by 1.622 dm
NSN
National Stock Number:
TXT
Description:
Straight Shaft
First End Groove Width:
0.0600 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
Second End Groove Width:
0.0580 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.500 inches
First End Distance From End To Groove:
0.187 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.9900 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.AMDN
First End Spline Minor Diameter:
0.8925 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.AMDP
First End Spline Major Diameter:
1.1259 inches
Second End Distance From End To Groove:
0.146 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
1.4770 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
0.8890 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
1.1242 inches
First End Spline Quantity:
8
Second End Spline Quantity:
8
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758, cond 1 military specification single material response
