MIL-STD-130 Screws

Identify in accordance with mil-std-130; fastener finish dacrotized plus bright metallic organic coating

Item is a torlon countersunk flat head machine screw; material: general-purpose polyamide-imide (torlon) grade 4203 = extruded rod, and 4203l = injection molded; workmanship - screws shall show no evidence of cross threading or multilation; thread length - full form threads shall extend to within two threads of the bearing surface of the head or closer if practicable; marking shall be in accordance with mil-std-130; quality assurance provisions

Item is a torlon countersunk flat head machine screw; material: general-purpose polyamide-imide (torlon) grade 4203 = extruded rod, and 4203l = injection molded; workmanship - screws shall show no evidence of cross threading or multilation; thread length - full form threads shall extend to within two threads of the bearing surface of the head or closer if practicable; marking shall be in accordance with mil-std-130; quality assurance provisions

Mil-std-130 mil std single material response overall

Item identification apply the following markings to container in accordance with mil-std-130"19207-12446304"manufacturer's cage code

Marking,mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

96906-mil-std-130 government standard

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130