MIL-STD-171 Commercial Hardware

Mil-std-171,finish no. 7.1.1 mil std single treatment response overall

Material:aluminum alloy plate,6061,t651,astm b209 or qq-a-250/11;finish:7.2.2 of mil-std-171,dyed dull black;install threaded inserts per ms33537 using wet primer ttt-p-1757.Type and color optional.Insert shall be flush to below flush 0.005 in.Remove tang and grind flush opposite side as required

Mil-std-171,class 4 mil std single treatment response

Mil-std-171,finish no. 5.4.1 mil std single treatment response overall

Aluminum alloy qq-s-225/8 or qq-a-200/8 6061 temper t6,finish anodic film 7.2.1 of mil-std-171,1.391 in. Lg,0.748 in. Min 0.752 in. Max w,1 hole 0.2577 in. Min 0.2661 in. Max,0.420 in. Min 0.424 in. Max deep,tap 0.281 in. Deep for 0.250-28 unf-2b,helical coil insert

Mil-std-171,finish 5.4.1 mil std single treatment response overall

Cres per astm a-582,tyep303 finish 5.4.1 of mil-std-171; mil-a-2550 and ansi y14.5-1973 apply; 1.35minus.02 by 0.312 porm 0.006 o/a; inside dia 0.261 plus 0.005 by 0.30 plus 0.04 lg with drill point permissable and remaining length is 0.193 in. Dia plus 0.005

C/o pin (2),pn ms16555-625 (no. 32);screw (3),pn ms16998-10;washer (3),pn ms35333-71;bracket,pn 8212244; gear,pn 10557486;screw (2),pn ms35276-201;finish 4.10;on surfaces marked x finish 21.3 of mil-std-171;bake primerand top coat;color olive drab no. X24087 of fed-std-595

Has 2 holes dia 0.142 + 0.007 in.,2 holes dia 0.142 + 0.007 in. & csk 99 deg + 2 deg x 0.229 in. + 0.010 in. Dia & 2 holes dia 0.310 + 0.008 in.; item has chemical film per finish 7.3.1 of mil-std 171 all over & lusterless black per mil-std-171,finish 20.8 color 37038 (fed-std-595) on all exterior surfaces & edges

Ho/a lg 3.06 in.; o/a lg of base 3.56 in.,o/a w of base 3.50 in.; support curve located 2.10 in. At ctr from base bottom w/ r 0.335 in.; al alloy 7075 temper t6,astm-b211; fin. No. 7.3.1 of mil-std-171

Chromate, mil-std-171, finish 7.3.1

Mil-std-171 fn 5.3.2.3 mil std single treatment response

Passivated, mil-std-171, finish 5.4.1

Mil-std-171,7.2.3 mil std 1st treatment response and tt-p-175 7,color y fed spec 2nd treatment response and mil-l-52909 mil spec 3rd treatment response

Mil-std-171 mil std 1st treatment response and fed-std-595 fed std 2nd treatment response