MIL-STD-171 Commercial Hardware

Alternate finish phosphate manganese,finish 5.3.1.3,mil-std-171; 4th hole 0.249 in. Min and 0.253 in. Mas dia

Mil-std-171 mil std single treatment response

Consists of material,stainless steel per astm-a351,grade cf 8; surface treatment,passivate per mil-std-171,finish 5.4.1.; 3.320 in. Min and 3.400 in. Max long; two mounting holes,0.348 in. Min and 0.372 in. Max dia; arch located along length,1.280 in. High; 0.375 in thk; one hole,threaded,0.375-16 unc-2b

Mil-std-171, 5.4.1 mil std single treatment response

Csteel,corrosion resisting,astm a351 gr cf 8,passivate,mil-std-171 finish 5.4.1; 0.620 in. Overall w; 2.510 in. Lg; two holes 0.360 in. Min and 0.372 in. Max dia; one hole threaded 0.375-16 unc 2b

Consists of material,stainless steel per astm-a351,grade cf 8; surface treatment,passivate per mil-std-171,finish 5.4.1.; 2.760 in. Long; flange,0.280 in. Thk; two mounting holes,0.340 in. Min and 0.370 in. Max dia; enclosed aperture,1.100 in. Inner dia; 1.400 in. Outer dia; 0.560 in. Deep

Steel,corrosion resisting,ams 5347,phosphate coating,mil-std-171,5.3.1.3 or 5.3.2.3

Mil-std-171,para 7.3.1 mil std single treatment response

Mil-std-171,5.4.1. Mil std single treatment response

Item has 24 pilot holes,dia 0.125 in. Which are riveted at assy iaw a10351,cl a,except driven heads shall be spherically radiused; item has chemical film finish of 7.3.1 of mil-std-171; dist from edge to 1st hole cntr along width is 0.500 in. W/subsequent c to c spacing of 1.500 in. & 5.900 in.; item has 6 elongated oval type openings with c to c spacings of 2.950 in. And 5.900 in.

Anodized, mil-std-171, finish 7.2.2

Mil-std-171 mil std single treatment response

Passivated, mil-std-171, finish 5.4.1

Steel,astm a36,uns k02600 or steel,ansi 1015-1025; painted finish; color black,mil-std-171,finish 4.4,5.2,20.1 or 20.2; 6,500 in. Overall lg; 4.688 in. H; 3.000 in. Dp; thread hole thru front surface 1.250-12 unf-3b-lh; thru hole in top center 0.219 in. Min and 0.224 in. Max dia; 4 side mounting holes 0.404 in. Min and 0.414 in. Max dia; 2 side mounting holes 0.312 in. Dia; top cut out on radius of 1.683 in. Min and 1.673 in. Max; 4 thd csk mounting holes on top 0.375-24 unf-2a,1.250 in. Min full thd; top and botton surfaces and threaded holes free of finish

Item at assembly has 2 holes,is chamfered 0.200 in. Porm 0.030 in. 4 places; has chemical film finish 7.3.1 of mil-std-171