Home
Aircraft Components
Aircraft Hydraulic, Vacuum and De-icing System Components
Dust And Moisture Seal Boots
NSN 1650-00-671-1923

1650-00-671-1923

Dust And Moisture Seal Boot email this page

Images

Reference images of this national stock number

Model or part number: S14-40-5054-3

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Actuator Boot NSN 1650-00-671-1923.

NSN 1650-00-671-1923 Datasheet

MRC:

The distance measured in a straight line from the bottom to the top of an item.ABKW

Overall Height:

1.188 inches

MRC:

The length of a straight line which passes through the center of a base,and terminates at the outside circumference.AGQD

Base Outside Diameter:

0.381 inches

MRC:

The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.BGKC

Opening Inside Diameter:

0.350 inches

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Rubber synthetic body

MRC:

Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL

Special Test Features:

Test time shall be five minutes at a temperature of -90f

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Thru-hole

MRC:

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST

Test Data Document:

78286-milr3065 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

MRC:

The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV

Fsc Application Data:

Aircraft hydraulic, vacuum and de-icing system

MRC:

NIIN:

006711923

MRC:

NATO Stock Number:

1650-00-671-1923

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A02000

MRC:

INC:

19302

MRC:

IMM:

KZ TX

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 1650-00-671-1923

A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8803300060

NAICS:

336413

End Use Class:

50070

SITC:

79295

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8803300060

Other Parts Of Airplanes Or Helicopters For Use In Military Aircraft (excludes Propellers, Rotors, Undercarriages, and Parts Thereof)

End Use Code 50070

Type Goods Parts For Military

Standard Intl. Trade Class (SITC) 79295

Parts Of Airplanes Or Helicopters, N.e.s.

Manufacturers

This NSN is registered to the following cage codes.

Cage 78286

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
S14-40-5054-3	2	XX	X	78286
S14-40-1021	2	KE	5	78286
S14-40-5054	2	XX	X	78286
S14-40-5054-1	2	XX	X	78286
SS2932	2	XX	X	78286

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

1650-00-671-1923

Images

Pricing & Availability

NSN 1650-00-671-1923 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Import / Export

Schedule B Codes Definitions:

Manufacturers

Compare Now »