change location
321-802-5889
321-733-7477
Model or part number: MC14438-1
About this product
Cbody aluminum alloy per qq-a-367,comp 7075-t73; 6.630 in. O/a lg; 4.810 in. O/a w; 2.500 in. O/a h; eight ports; solenoid rating 18.0 to 30.0 vdc; current rating 0.8 amps at 70.0 deg f and 28 vdc
Valve Directional Control NSN 1650-01-172-3642.
NSN 1650-01-172-3642 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
A manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: valve, solenoid. Excludes valve, plug. See also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
No special marking.
Heated general purpose - heated 40 f and above.
Preserve by method 30 as follows: each unit shall have all internal fluid-carrying passages, which are not prelubricated, filled with the specified preservative, allowing space for internal thermal expansion. if filling is not practical, the unit shall be internally fog-sprayed or flushed, then drained to the drip point. all ports, fittings, openings, etc., shall be capped or plugged with non-corrosive (non-interacting) metal caps or plugs conforming to nas 847 or equivalent. all hydraulic preservative operating fluid used shall be filtered through a 3 micron absolute filter prior to being used as specified above. exterior bare metal surfaces, subject to corrosion, shall be coated with compound conforming to mil-prf-16173, grade 2 or mil-c-11796, class 3. unit shall be wrapped with a greaseproof wrap conforming to mil-prf-121 or equivalent; seal seams with astm-d5486 tape to effect a measure of waterproofness and prevent unwrapping. the unit must be adequately cushioned with material specified and placed in a grade v3c container fabricated in accordance with astm-d5118 (as a minimum), style fol or cssc. all seams, corners, and manufacturer's joint shall be tape-sealed with two inch tape conforming to astm-d5486, type iii or iv.
A-a-1898, grade ii, water resistant cellulose cushioning.
Mil-prf-83282, hydraulic fluid, synthetic, fire retardant.
Other Parts Of Airplanes Or Helicopters For Use In Military Aircraft (excludes Propellers, Rotors, Undercarriages, and Parts Thereof)
Type Goods Parts For Military
Parts Of Airplanes Or Helicopters, N.e.s.
No special type of cargo code applicable.
Aircraft parts, to include test/tool sets and equipment (other than armament systems).
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| MC14438-1 | 2 | KE | 1 | 76050 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||