1680-00-528-1709

Flexible Shaft Assembly email this page
ITAR Registered

Model or part number: 7592Y

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Speedometer Cable NSN 1680-00-528-1709.

pdf NSN 1680-00-528-1709 Datasheet

MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b first end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand first end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.344 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.292 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
11.038 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12 first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.208 inches first end
MRC:
The length of a straight line which passes through the center of the wrenching facility,and terminates at the outside circumference.ADMS
Wrenching Facility Outside Diameter:
0.813 inches first end
MRC:
A measurement of the longest dimension of the tip,in distinction from width.AEDN
Tip Length:
0.469 inches first end
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.556 inches first end
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.250 inches first end
MRC:
The element,compound,or mixture of which the core is fabricated.AJXJ
Core Material:
Steel
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf first end
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the core surface.AKMF
Core Surface Treatment:
Cadmium plated
MRC:
The length of a straight line which passes through the center of the core,and terminates at the circumference.AKMH
Core Diameter:
0.212 inches
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal first end
MRC:
Indicates the type of end.APTD
End Type:
Round, internal splined first end
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Threaded internal first end
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
14.5 first end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.250 inches first end
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute first end
MRC:
An indication of whether or not a setscrew(s) is included.BDRL
Setscrew:
Not included first end
MRC:
The element,compound,or mixture of which the casing is fabricated,excluding any surface treatment.BJPS
Casing Material:
Steel
MRC:
Indicates the type of facility utilized to assemble or disassemble the item.BPPL
Wrenching Facility Type:
Knurled surface first end
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.406 inches diameter first end
MRC:
The amount of twisting or degree of bending which the item is designed to withstand.CFRM
Torsional Deflection Rating:
12 degrees ft -lb in. Torsional deflection rating 20 degrees ft-lb in, torsional deflection rationing unwinding direction
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the casing surface.CFRN
Casing Surface Treatment:
Zinc coated
MRC:
A measurement of the longest dimension of the casing between ferrules,in distinction from width.CFRP
Casing Length Between Ferrules:
7.850 inches
MRC:
The length of a straight line which passes through the center of the casing,and terminates at the outside circumference.CFRQ
Casing Outside Diameter:
0.456 inches
MRC:
Indicates the type of protective device included with the casing.CFRR
Casing Protective Device Type:
Braided wire shield
MRC:
An indication of whether or not a swivel end(s) is provided.CFRT
Swivel End:
Provided first end
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of the end of the item.CFRW
Enddiameter:
0.813 inches first end
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the core.CFRZ
Corelength:
11.038 inches
MRC:
The direction in which the core is designed to rotate,when viewed axially,from the drive end.CFSB
Core Rotation Direction:
Clockwise or counterclockwise
MRC:
An indication of whether or not the core(s) is removable.CFSL
Core Removability:
Removable
MRC:
The radius of the smallest operating circle for which the item is designed.CGDN
Minimum Operating Radius:
3.000 inches
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Pedal installation, rudder and brake, aircraft
MRC:
--
NIIN:
005281709
MRC:
--
NATO Stock Number:
1680-00-528-1709
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
FIIG:
--
FIIG:
T246-E
MRC:
--
INC:
20315
MRC:
--
IMM:
CX AX CX
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 1680-00-528-1709

An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also control assembly, push-pull.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
8803300060
NAICS:
336413
End Use Class:
50070
SITC:
79295
USDA:
1
HITECH:
8

Schedule B Codes Definitions:

Schedule B 8803300060

Other Parts Of Airplanes Or Helicopters For Use In Military Aircraft (excludes Propellers, Rotors, Undercarriages, and Parts Thereof)

End Use Code 50070

Type Goods Parts For Military

Standard Intl. Trade Class (SITC) 79295

Parts Of Airplanes Or Helicopters, N.e.s.

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
129920
NMF Description:
Flex Noi Stl Shafts/shafting
UFC:
65750
LTL:
85.0
LCL:
--
WCC:
671
TCC:
Z
SHC:
Z
ADC:
A
ACC:
A

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 671

Aircraft parts, to include test/tool sets and equipment (other than armament systems).

Air Commodity (ACC) A

Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) Z

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide