2920-00-830-6660

Engine Accessory Generator email this page
ITAR Registered

Images

Reference images of this national stock number
Reference of NSN 2920-00-830-6660 Reference of NSN 2920-00-830-6660

Model or part number: G22-6F

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Alternator Engine Accessory NSN 2920-00-830-6660.

pdf NSN 2920-00-830-6660 Datasheet

MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.809 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 0.862 inches and 0.867 inches
MRC:
None.AAUK
Spline Width:
0.073 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
16
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.500 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
12
MRC:
None.ABUH
Mounting Hole Circle Radius:
1.520 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting.ADER
Mounting Style:
Round flange with holes equally spaced
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Dustproof
MRC:
An indication of whether or not an item is capable of operation while submerged.AHZV
Submersibility:
Nonsubmersible
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.750 inches
MRC:
Indicates the type of ground polarity utilized.AXHX
Ground Polarity Type:
Negative
MRC:
The minimum speed the armature can revolve and maintain full current output,expressed in revolutions per minute.BCGD
Armature Minimum Speed In Rpm At Full Current Output:
1900
MRC:
The maximum amount of output current for which the item is rated,expressed in amperes.BCGF
Maximum Output Current Rating In Amps:
500.0
MRC:
The cut-in speed necessary to maintain a minimum current flow,expressed in revolutions per minute.BCGG
Minimum Current Cut-in Speed In Rpm:
1500
MRC:
Indicates the location of the rectifier for the item.BCGM
Rectifier Location:
Integral
MRC:
The means by which the item is grounded.BCGN
Grounding Method:
Internal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft drive end.BCGS
Shaft Drive End Style:
Splined shaft end
MRC:
The speed the armature can revolve and produce maximum current,expressed in revolutions per minute.BCND
Maximum Rated Armature Speed In Rpm:
8000
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
28.5
MRC:
--
NIIN:
008306660
MRC:
--
NATO Stock Number:
2920-00-830-6660
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
Yes - DEMIL/MLI
Export Control Information  
FIIG:
--
FIIG:
A14700
MRC:
--
INC:
17311
MRC:
--
IMM:
CX
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

End Items and Platforms

End items to which this NSN is a component of.
  • M51/m74/m88 Recovery Vehicle
  • Full Tracked Recovery Vehicle
  • Full Tracked Combat Engineer Vehicle
  • Diesel Engine
  • Engine With Contain
  • Engine And Containe

Parts and Components for Engine Accessory Generator NSN 2920-00-830-6660 Parts and components for this end application.

NSN Component Description
NSN 2990-00-411-8330 Exhaust Pipe

Technical Manual(s) Army Technical Manuals

  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P
  • TM 9-2920-224-34&P

Formal Definition

Government issue definition of NSN 2920-00-830-6660

A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "generating sets". For generators specifically designed for aircraft use and not mounted on the engine, see generator, direct current.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
30.1 X 16.4 X 14.9
Paclk Weight:
1,160.0000lbs
Item Weight:
--
Item Dim:
022001080088
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
SPI No.:
SPI Rev.:
SPC Mkg:
LVL_A:
LVL_B:
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
ZZ
MOP:
ZZ
PKG:
ZZZZ
PRES MAT:
ZZ
WRAP MAT:
ZZ
ICQ:
THK:
Z
TOS:
B
UCL:

Packaging Codes Definitions:

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
8511500000
NAICS:
336320
End Use Class:
30200
SITC:
77831
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 8511500000

Generators For Internal Combustion Engines, Nesoi

End Use Code 30200

Engines and Engine Parts (carburetors, Pistons, Rings, and Valves)

Standard Intl. Trade Class (SITC) 77831

Outs, Etc. Ignition Internal Combustion Engines; Generators and Cut Ignition Or Compression Electrical Ignition Or Starting Equipment Used For Spark

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
062120
NMF Description:
Generators/motors/parts Noi
UFC:
34760
LTL:
Rating variable
LCL:
Rating variable
WCC:
590
TCC:
Z
SHC:
9
ADC:
A
ACC:
V

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 590

Generators and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide