2990-00-941-1542

Exhaust Muffler email this page

Model or part number: L6656

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Muffler Resonator NSN 2990-00-941-1542.

pdf NSN 2990-00-941-1542 Datasheet

MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 12.120 inches and 12.240 inches
MRC:
A narrative description of the type of inlet connection.ACQW
Inlet Connection Type:
Unthreaded
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
8.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
3930-00-903-0899
MRC:
The length of a straight line which passes through the center of the outlet,and terminates at the inside circumference.AJLW
Outlet Inside Diameter:
3.015 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
Indicates the type of coolant used with the item.ARNA
Coolant Type:
Air
MRC:
The basic design of the muffler.ARND
Muffler Design:
Straight through
MRC:
The number of tubes included on the item.ARNF
Tube Quantity:
1
MRC:
The physical configuration of the body.ARNG
Body Shape:
Round
MRC:
The position in which the item is designed to operate.ARNH
Operating Position:
Horizontal
MRC:
The location of the inlet.ARNJ
Inlet Location:
Centrally located in end section of body
MRC:
A measurement of the longest dimension of the inlet projection,in distinction from width.ARNK
Inlet Projection Length:
4.420 inches
MRC:
The length of a straight line which passes through the center of the inlet,with terminated points on the outside circumference.ARSQ
Inlet Outside Diameter:
3.120 inches
MRC:
The length of a straight line which passes through the center of the inlet,with terminated points on the inside circumference.ARTE
Inlet Inside Diameter:
3.015 inches
MRC:
A narrative description of the type of outlet connection.ARTH
Outlet Connection Type:
Unthreaded
MRC:
The location of the outlet.ARTJ
Outlet Location:
Centrally located in end section of body
MRC:
A measurement of the longest dimension of the outlet projection,in distinction from width.ARTK
Outlet Projection Length:
1.500 inches
MRC:
The length of a straight line which passes through the center of the outlet,with terminated points on the outside circumference.ARWA
Outlet Outside Diameter:
3.120 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Aluminum
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Aluminum
MRC:
--
NIIN:
009411542
MRC:
--
NATO Stock Number:
2990-00-941-1542
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
T135-C
MRC:
--
INC:
10849
MRC:
--
IMM:
CX
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Fork Lift Truck NSN 3930-00-903-0899 Parts and components for this end application.

NSN Component Description
NSN 2910-00-004-8422 Fuel Injector Nozzle Spray Tip
NSN 2530-00-019-2544 Steering Gear Box
NSN 3040-00-034-1687 Mechanical Drive Housing
NSN 4820-00-034-1691 Valve Seat
NSN 2530-00-034-1735 Steering Wheel
NSN 2520-00-045-3543 Control Linkage Assembly
NSN 2590-00-045-3780 Control Lever Shaft
NSN 3040-00-045-3814 Linear Actuating Cylinder
NSN 2815-00-050-9496 Air Inlet Housing Cover
NSN 2815-00-074-1929 Rocker Arm Cover Clamp And Screw
NSN 2815-00-074-1932 Flywheel Scuff Plate
NSN 5340-00-087-8944 Access Cover
NSN 4820-00-089-2034 Valve Disk
NSN 3040-00-089-6450 Straight Shaft
NSN 3040-00-089-6455 Counterbalance Weight
NSN 3040-00-089-7777 Shouldered Shaft
NSN 2815-00-103-2176 Oil Cooler Housing
NSN 5340-00-121-3070 Access Cover
NSN 2520-00-125-2991 Left Hand Adjuster
NSN 2520-00-155-3013 Vehicular Clutch Disk
NSN 2520-00-164-5407 Block
NSN 2540-00-198-7452 Control Pedal
NSN 2530-00-226-1289 Bead Seat Band
NSN 2990-00-228-6968 Air Inlet Housing
NSN 2930-00-228-6969 Engine Water Outlet
NSN 4730-00-236-6281 Flange To Pipe Elbow
NSN 2530-00-243-9916 Linear Actuating Cyli Piston Rod
NSN 5340-00-247-0024 Access Cover
NSN 4320-00-247-0045 Plate Adapter
NSN 4320-00-261-8168 Pump-motor Hydraulic Cover
NSN 2520-00-283-9105 Vehicular Clutch Disk
NSN 4320-00-287-6502 Converter Pump
NSN 2930-00-314-3566 Cap And Spacer Assembly
NSN 2510-00-314-3585 Engine Mount Bracket
NSN 2815-00-317-1682 Governor Speed Retainer

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
XX
MOP:
AE
PKG:
16Z0
PRES MAT:
00
WRAP MAT:
XX
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) AE

Seal or plug all openings and preserve by method 10.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
8708925000
NAICS:
336390
End Use Class:
30230
SITC:
78439
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 8708925000

Mufflers and Exhaust Pipes For Vehicles, Nesoi

End Use Code 30230

Other Parts and Accessories Of Vehicles

Standard Intl. Trade Class (SITC) 78439

Transport Vehicles and Road Motor Vehicles, N.e.s. Parts and Accessories N.e.s. For Tractors, Motor Cars and Other Motor Vehicles, Trucks, Public

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
125850
NMF Description:
Muffler/exhaust Sys/pipe/etc
UFC:
61440
LTL:
Rating variable
LCL:
--
WCC:
593
TCC:
Z
SHC:
9
ADC:
A
ACC:
V

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide