3020-00-110-9722

Groove Pulley email this page

Images

Reference images of this national stock number

Model or part number: 13215E3260

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Sheave NSN 3020-00-110-9722.

NSN 3020-00-110-9722 Datasheet

MRC:

The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY

Counterbore Diameter:

3.380 inches

MRC:

The depth of the process used to enlarge part of a hole.AAWZ

Counterbore Depth:

0.250 inches

MRC:

A measurement between specified points of a groove,in distinction from height.ABGA

Groove Depth:

0.452 inches

MRC:

A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF

Groove Width:

0.615 inches

MRC:

The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE

Outside Diameter:

7.750 inches

MRC:

A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR

Keyway Width:

0.188 inches

MRC:

A measurement of the longest dimension of a bore.ADGE

Bore Length:

1.250 inches

MRC:

A measurement of the amount of turning necessary to bring one keyway into coincidence with another,expressed in degrees.AEVJ

Keyway Spacing In Deg:

360.0

MRC:

The angle of the v groove,expressed in degrees.AGGS

V Groove Angle In Deg:

34.0

MRC:

A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS

Pitch Diameter:

6.845 inches

MRC:

The length of a straight line which passes through the center of the largest portion of a tapered bore,and terminates at the circumference.ANAL

Taper Bore Major Diameter:

0.990 inches

MRC:

The length of a straight line which passes through the center of the smallest portion of a tapered bore,and terminates at the circumference.ANAM

Taper Bore Minor Diameter:

Between 0.834 inches and 0.836 inches

MRC:

The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ

Material And Location:

Iron, cast

MRC:

A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL

Face Width:

3.250 inches

MRC:

The physical configuration of the item.ARJD

Design Form:

Webbed

MRC:

Indicates the type of bore used on the item.ASBP

Bore Type:

Tapered

MRC:

An indication of whether or not bearings are included.AWJQ

Bearings:

Not included

MRC:

Indicates the location of the taper major diameter.AWPJ

Taper Major Diameter Location:

Aa end

MRC:

The number of grooves provided.AXHQ

Groove Quantity:

MRC:

An indication of whether or not a counterbore feature is included.AXND

Counterbore Feature:

Included

MRC:

Indicates the location of the counterbore on the item.BDYS

Counterbore Location:

Aa end

MRC:

An indication of whether or not a keying facility is included.BSGG

Keying Facility:

Included

MRC:

Indicates the type of keying facility provided.BSGK

Keying Facility Type:

Tapered keyway

MRC:

An indication of whether or not a split hub feature is included.BSYG

Split Hub Feature:

Not included

MRC:

An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH

Web/spoke Relationship To Face Centerline:

Not offset

MRC:

An indication of whether or not a lightening hole/s/ is included.BXSJ

Lightening Hole:

Not included

MRC:

An indication of whether or not an integral cooling vane(s) is included.BXSK

Integral Cooling Vane:

Not included

MRC:

The physical configuration of the groove.BXSM

Groove Shape:

MRC:

The alpha and/or numeric section designation of the standard v-belt for which designed.BXSN

Standard V-belt Section Designation For Which Designed:

MRC:

An indication of whether or not a bore feature is included.BYDS

Bore Feature:

Included

MRC:

Indicates the location of the largest dimension of the keying facility.BYDY

Keying Facility Largest Dimension Location:

Aa end

MRC:

None.BYZF

Distance From Outside Flange/rim To Hub End And Location:

1.000 inches both ends

MRC:

A numeric value which represents a positive whole value without regard to any unit of measure.NMBR

Quantity:

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Paint

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Webbed or spoked

MRC:

Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF

Surface Treatment:

Painted

MRC:

NIIN:

001109722

MRC:

NATO Stock Number:

3020-00-110-9722

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

T353-A

MRC:

INC:

08109

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 3020-00-110-9722

A pulley with one or more grooved faces or rims of the same diameter. For pulleys encased in a shell or frame, see block, tackle. for items specifically designed for aviation, see pulley(1), groove, aviation.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8487900080

NAICS:

333999

End Use Class:

21180

SITC:

74999

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8487900080

Machinery Parts Not Containing Electrical Features, and Not Specified Or Included Elsewhere In Chapter 84, Except Ships' Propellers

End Use Code 21180

Industrial Machines, Other

Standard Intl. Trade Class (SITC) 74999

Machinery Parts, Not Containing Electrical Connectors, Insulators, Coils, Contacts Or Other Electrical Features, N.e.s.

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
13215E3260	2	AX	3	79425
13215E3260	2	AX	1	97403

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

3020-00-110-9722

Images

Pricing & Availability

NSN 3020-00-110-9722 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Import / Export

Schedule B Codes Definitions:

Manufacturers

Compare Now »