3040-01-323-5939

Shouldered Shaft email this page
ITAR Registered

Images

Reference images of this national stock number
Reference of NSN 3040-01-323-5939

Model or part number: SW25350

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

About this product
Chamfer on second end,0.060 in. By 30.0 deg; chamfer on right edge of groove on first end,0.060 in. By 30.0 deg

Description

Stop-receiver Fixture Plunger NSN 3040-01-323-5939.

pdf NSN 3040-01-323-5939 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved
MRC:
None.AAHG
First End Groove Width:
0.1200 inches
MRC:
None.AAHH
First End Groove Diameter:
2.9400 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved
MRC:
None.AAHW
Second End Groove Width:
0.1200 inches
MRC:
None.AAHX
Second End Groove Diameter:
2.9400 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 10.080 inches and 10.140 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2330-01-303-8832 m1000 chettl trailer
MRC:
None.AMCY
First End Distance From End To Groove:
1.000 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 3.0380 inches and 3.0390 inches
MRC:
None.AMFQ
Second End Distance From End To Groove:
1.000 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 2.9750 inches and 2.9760 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
3.039 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1026
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a519, grade 1026 assn standard single material response or astm a513, type 5, grade 1026 assn standard single material response
MRC:
--
NIIN:
013235939
MRC:
--
NATO Stock Number:
3040-01-323-5939
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
Yes - DEMIL/MLI
Export Control Information  
FIIG:
--
FIIG:
A23200
MRC:
--
INC:
22914
MRC:
--
IMM:
AX
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Tank Transporter Semitrailer NSN 2330-01-303-8832 Parts and components for this end application.

NSN Component Description
NSN 3110-00-101-1010 Tapered Roller Cone And Rollers
NSN 5310-00-178-7733 Flat Washer
NSN 3120-00-420-5772 Self-aligning Plain Bearing
NSN 5340-00-466-4948 Rod End Clevis
NSN 2540-00-490-0769 Block Chock
NSN 6220-00-752-6516 Lens Retainer
NSN 5365-00-753-4865 Ring Spacer
NSN 5315-00-896-8950 Headed Straight Pin
NSN 5310-00-930-7013 Flat Washer
NSN 5330-01-024-2294 Preformed Packing
NSN 5342-01-081-2622 Speed Ball Handle
NSN 6220-01-095-0009 Vehicular Stop Light-taillight
NSN 6220-01-095-0019 Light Lens
NSN 5995-01-096-0733 Electrical Lead Assembly
NSN 5940-01-115-8272 Terminal Box
NSN 5340-01-116-3348 Clamping Catch
NSN 5310-01-117-2404 Hexagon Plain Nut
NSN 5310-01-117-6260 Hexagon Plain Nut
NSN 5342-01-141-7101 Nylon Ball
NSN 3110-01-145-1639 Tapered Roller Cone And Rollers
NSN 5325-01-154-8557 Retaining Ring
NSN 5360-01-158-1974 Extension Helical Spring
NSN 5340-01-173-3857 Bow Handle
NSN 5310-01-174-0431 Flat Washer
NSN 5305-01-186-5859 Setscrew
NSN 2590-01-187-2325 Vehicular Components Filler Neck
NSN 5310-01-224-6835 Flat Washer
NSN 4820-01-225-1479 Safety Relief Valve
NSN 3950-01-233-2393 Hand Operated Drum Winch
NSN 4820-01-236-2650 Check Valve
NSN 5340-01-249-8683 Loop Clamp
NSN 5330-01-253-3161 Preformed Packing
NSN 5310-01-290-2192 Hexagon Plain Nut
NSN 4820-01-291-0991 Drain Cock
NSN 5310-01-291-2200 Slotted Washer

Formal Definition

Government issue definition of NSN 3040-01-323-5939

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
12.0 X 5.0 X 5.0
Paclk Weight:
3.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
XX
MOP:
20
PKG:
18ZZ
PRES MAT:
49
WRAP MAT:
GB
ICQ:
000
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 20

Preservative coating only (with greaseproof wrap, as required).

Preservation Material (PRES_MAT) 49

Vendor's protective grease or oil coating.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
8483105000
NAICS:
333613
End Use Class:
21180
SITC:
74810
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 8483105000

Transmission Shafts and Cranks, Except Camshafts and Crankshafts

End Use Code 21180

Industrial Machines, Other

Standard Intl. Trade Class (SITC) 74810

Transmission Shafts (including Cam and Crank Shafts) and Cranks

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
126900
NMF Description:
Power Trans Shafting/shafts
UFC:
65750
LTL:
Rating variable
LCL:
--
WCC:
593
TCC:
Z
SHC:
9
ADC:
A
ACC:
V

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide