change location
321-802-5889
321-733-7477
Model or part number: 02045400
Stop-receiver Fixture Plunger NSN 3040-01-425-6569.
NSN 3040-01-425-6569 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4820-01-421-4607 | Drain Cock |
| NSN 4730-01-421-4608 | Flange Elbow |
| NSN 4730-01-421-4609 | Flange Elbow |
| NSN 4730-01-421-4610 | Pipe Bushing |
| NSN 4730-01-421-4611 | Tube To Hose Elbow |
| NSN 4730-01-421-4616 | Pipe To Hose Straight Adapter |
| NSN 4720-01-421-5154 | Nonmetallic Hose Assembly |
| NSN 4730-01-421-5324 | Tube Nipple |
| NSN 4730-01-421-5329 | Hydraulic Fitting |
| NSN 4730-01-421-5336 | Tube To Hose Straight Adapter |
| NSN 5670-01-421-6486 | Railing Flange |
| NSN 4730-01-421-6500 | Pump Coupling |
| NSN 4730-01-421-6502 | Tube To Boss Straight Adapter |
| NSN 4820-01-421-6764 | Globe Valve |
| NSN 4730-01-421-6766 | Tube To Hose Elbow |
| NSN 2530-01-421-8059 | Hydraulic Accumulator Cylinder |
| NSN 4820-01-421-8073 | Check Valve |
| NSN 4820-01-421-8074 | Safety Relief Valve |
| NSN 4720-01-421-8792 | Nonmetallic Hose Assembly |
| NSN 4720-01-421-8797 | Nonmetallic Hose Assembly |
| NSN 4720-01-421-8798 | Nonmetallic Hose Assembly |
| NSN 4720-01-421-8799 | Nonmetallic Hose Assembly |
| NSN 4720-01-421-8800 | Nonmetallic Hose Assembly |
| NSN 4720-01-421-8803 | Nonmetallic Hose Assembly |
| NSN 4720-01-421-8804 | Nonmetallic Hose Assembly |
| NSN 4820-01-421-9627 | Check Valve |
| NSN 4720-01-422-1913 | Nonmetallic Hose Assembly |
| NSN 4720-01-422-1915 | Nonmetallic Hose Assembly |
| NSN 4720-01-422-1916 | Nonmetallic Hose Assembly |
| NSN 4720-01-422-1917 | Nonmetallic Hose Assembly |
| NSN 4720-01-422-1918 | Nonmetallic Hose Assembly |
| NSN 4720-01-422-1919 | Nonmetallic Hose Assembly |
| NSN 4720-01-422-1920 | Nonmetallic Hose Assembly |
| NSN 4820-01-422-5633 | Flow Control Valve |
| NSN 3020-01-422-9933 | Spur Gear |
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Preservative coating only (with greaseproof wrap, as required).
No requirement.
Vendor's protective grease or oil coating.
Transmission Shafts and Cranks, Except Camshafts and Crankshafts
Industrial Machines, Other
Transmission Shafts (including Cam and Crank Shafts) and Cranks
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 02045400 | 2 | ZZ | 6 | 1Y128 |
| 02045400 | 9 | ZZ | 6 | 54217 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||