change location
321-802-5889
321-733-7477
Model or part number: 154061
About this product
Bnext higher assembly p/n 137780 and p/n 137645. Large eye is tapered, 1.375 inches diameter on top, 1.312 inches diameter on bottom; other end hole (clevis) is 0.380 inches diameter through both
Link Assembly NSN 3040-01-498-2038.
NSN 3040-01-498-2038 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 6760-01-295-3560 | Photographic Equipment Case |
| NSN 2350-01-420-4716 | Full Tracked Personnel Carrier |
| NSN 5935-01-497-0371 | Electrical Receptacle Connector |
| NSN 5935-01-497-0389 | Electrical Receptacle Connector |
| NSN 5935-01-497-0541 | Electrical Receptacle Connector |
| NSN 5970-01-497-2338 | Electrical Insulation Sleeving |
| NSN 5970-01-497-2389 | Electrical Insulation Sleeving |
| NSN 5970-01-497-2629 | Electrical Insulation Sleeving |
| NSN 4720-01-497-2646 | Air Duct Hose |
| NSN 5970-01-497-2749 | Electrical Insulation Sleeving |
| NSN 5970-01-497-2755 | Electrical Insulation Sleeving |
| NSN 4720-01-497-2842 | Nonmetallic Hose Assembly |
| NSN 4720-01-497-2876 | Nonmetallic Hose Assembly |
| NSN 5970-01-497-4695 | Electrical Insulation Sleeving |
| NSN 1240-01-497-4869 | Sight Mount |
| NSN 5930-01-497-5108 | Switch Guard |
| NSN 3040-01-497-5122 | Rotating Shaft Eye Bracket |
| NSN 3040-01-497-5165 | Shaft Collar |
| NSN 3040-01-497-5199 | Shouldered Shaft |
| NSN 3040-01-497-5452 | Straight Shaft |
| NSN 5340-01-497-5550 | Angle Bracket |
| NSN 9320-01-497-5593 | Solid Rubber Sheet |
| NSN 9905-01-497-5647 | Marker Band |
| NSN 6210-01-497-6133 | Indicator Light |
| NSN 5307-01-497-6759 | Shouldered And Stepped Stud |
| NSN 3120-01-497-7031 | Rod End Plain Bearing |
| NSN 5305-01-497-7506 | Thumbscrew |
| NSN 5998-01-497-7514 | Circuit Card Assembly |
| NSN 6615-01-497-7529 | Gyroscope Mount |
| NSN 1005-01-497-8549 | Automatic Gun Rotor |
| NSN 1005-01-497-8552 | Automatic Gun Rotor |
| NSN 1005-01-497-8570 | Automatic Gun Rotor |
| NSN 1240-01-497-8639 | Mount Subassembly |
| NSN 1240-01-497-8643 | Mount Subassembly |
| NSN 1005-01-497-8752 | Turret Base Cover |
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. For cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No special type of cargo code applicable.
Metal hardware.
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 10/15 | 10/17 | 03/17 | 10/18 |
|---|---|---|---|
| 19.00 | 19.00 | 19.00 | 40.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 154061 | 2 | ZZ | A | 57039 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||