change location
321-802-5889
321-733-7477
Model or part number: 12271218 R99
About this product
Split measures 0.022 max to 0.018 min in. (vespel), 0.007 max to 0.003 min in. (polybon)
Fitting Tail Rotor Blade Bushing NSN 3120-01-099-6422.
NSN 3120-01-099-6422 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5340-00-678-3472 | Seal Retaining Plate |
| NSN 5340-00-708-3883 | Manual Control Handle |
| NSN 2835-00-937-5844 | Nonaircraft Gas Turb Heat Shield |
| NSN 1015-00-968-6329 | Operating Lever Breechblock Cam |
| NSN 6625-01-059-4279 | Test Probe |
| NSN 6680-01-060-7175 | Vibrating Reed Tachometer |
| NSN 2530-01-063-5655 | Compensating Shaft |
| NSN 3040-01-063-5657 | Rigid Connecting Link |
| NSN 3040-01-063-5658 | Linear Actuating Cylinder |
| NSN 2530-01-063-5666 | Vehicular Wheel Hub |
| NSN 2530-01-063-5668 | Track Suspens Pivot Arm Assembly |
| NSN 2530-01-063-5670 | Track Shoe Wedge |
| NSN 5330-01-063-5676 | Packing Retainer |
| NSN 5340-01-063-5825 | Metallic Solid Wheel |
| NSN 5305-01-063-5829 | Hexagon Head Cap Screw |
| NSN 5330-01-063-5839 | Seal Retainer |
| NSN 3130-01-063-5845 | Bearing Unit Housing |
| NSN 2530-01-063-5862 | Wheel Hub Cap |
| NSN 5340-01-065-6142 | Mounting Bracket |
| NSN 5340-01-065-6143 | Mounting Bracket |
| NSN 2520-01-067-2281 | Friction Clut Intermediate Plate |
| NSN 3010-01-067-2319 | Shaft Coupling Half |
| NSN 2520-01-067-3873 | Transmission Fluid Cooler |
| NSN 2520-01-067-3899 | Friction Clutch Assembly |
| NSN 5330-01-068-4072 | Gasket |
| NSN 4730-01-069-3369 | Pipe Bushing |
| NSN 4730-01-069-3370 | Pipe Bushing |
| NSN 4710-01-069-5925 | Metal Tube Assembly |
| NSN 5310-01-070-2837 | Matche Spring Tension Washer Set |
| NSN 5340-01-071-9051 | Mounting Bracket |
| NSN 5340-01-071-9052 | Mounting Bracket |
| NSN 1015-01-072-4176 | Breechblock Handle |
| NSN 5315-01-072-4488 | Threaded Straight Pin |
| NSN 2910-01-072-9927 | Electrical Fuel Pump |
| NSN 2520-01-072-9943 | Transmission Fluid Cooler |
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes bushing, drill, jig.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Greaseproof-waterproof bag, sealed.
Parts, Nesoi, For Cylindrical Roller Bearings, Nesoi
Industrial Machines, Other
Parts Of Ball and Roller Bearings, N.e.s.
No special type of cargo code applicable.
Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc.
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 12271218 R99 | 2 | ZZ | 2 | 19207 |
| 12271218 | 2 | AZ | 1 | 19207 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||