3455-00-816-9349

Machine Reamer email this page

Model or part number: T-27872-2

Stock Availability condition code chart

This product is available in the following quantities and conditions.

NS: 7

Total: 7 Note: Availability of this item was last updated 06/05/2020, and may have changed since then. Request a quote for up to date pricing and availability.

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Taper Pin Reamer NSN 3455-00-816-9349.

NSN 3455-00-816-9349 Datasheet

MRC:

The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL

Pilot Diameter:

0.185 inches

MRC:

The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.AAVM

Pilot Length:

1.375 inches

MRC:

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE

Shank Diameter:

0.406 inches

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

5.750 inches

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ

Diameter:

0.563 inches

MRC:

A measurement of the longest dimension of the flute,in distinction from width.ALAA

Flute Length:

1.375 inches

MRC:

The number of flutes provided.ALAR

Flute Quantity:

MRC:

Indicates the type of shank.AQPP

Shank Type:

Straight

MRC:

An indication of the helix direction.AQQL

Helix Direction:

Left-hand

MRC:

Indicates the specific type of reamer provided.AQTJ

Reamer Type:

Taper pin

MRC:

The design of the flutes.AQWG

Flute Design:

Spiral

MRC:

Indicates the type of flute provided.AQWH

Flute Type:

Integral

MRC:

An indication of the direction of the flute cut.AQWJ

Flute Cut Direction:

Right-hand

MRC:

The element,compound,or mixture of which the cutting edge tips are fabricated,excluding any surface treatment.AQWK

Cutting Edge Tip Material:

Steel, high speed

MRC:

Indicates the type of pilot provided.AQWL

Pilot Type:

Fixed

MRC:

An indication of whether or not a guide is included.AQWM

Guide:

Not included

MRC:

The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL

Material:

Steel, high speed

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel

MRC:

NIIN:

008169349

MRC:

NATO Stock Number:

3455-00-816-9349

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

T171-E

MRC:

INC:

05238

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 3455-00-816-9349

Excludes reamer, shell, fluted and reamer, shell, rose.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.2000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

60Z0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 05

Delicate instrument.

Method of Preservation (MOP) 31

Waterproof bag, sealed.

Cushion Material (CUSH) NA

Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8207504060

NAICS:

333517

End Use Class:

21120

SITC:

69564

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8207504060

Drilling Tools Suitable For Cutting Metals, and Parts Thereof

End Use Code 21120

Metalworking Machine Tools

Standard Intl. Trade Class (SITC) 69564

Tools (pressing, Stamping, Punching, Drilling, Etc.), Including Dies For Extruding Metal Interchangeable Tools For Hand Tools Or For Machine

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

186630

NMF Description:

Tools:noi O/t Plstc In Bbls/bxs

UFC:

91810

LTL:

77.5

LCL:

WCC:

732

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 732

Tools, hand and portable, electric.

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Aviation Supply Chain

02/19
64.00

Manufacturers

This NSN is registered to the following cage codes.

Cage 97499

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
T-27872-2	2	ZZ	5	97499
T-27872-2	2	ZZ	5	97499
T-27872-2	2	ZZ	5	97499
T-27872-2	2	ZZ	5	97499

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

3455-00-816-9349

Pricing & Availability

NSN 3455-00-816-9349 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

DLA History / Forecast Quantities

Manufacturers

Compare Now »