change location
321-802-5889
321-733-7477
Model or part number: 66-9964
Drain Tube NSN 4710-01-542-1609.
NSN 4710-01-542-1609 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 9330-01-542-0514 | Pressure Sensitive Plastic Strip |
| NSN 9330-01-542-0547 | Pressure Sensitive Plastic Strip |
| NSN 9330-01-542-0553 | Pressure Sensitive Plastic Strip |
| NSN 4710-01-542-0557 | Metal Tube Assembly |
| NSN 4710-01-542-0568 | Metal Tube Assembly |
| NSN 4710-01-542-0572 | Metallic Bent Tube |
| NSN 5340-01-542-0579 | Mounting Plate |
| NSN 5340-01-542-0665 | Loop Clamp |
| NSN 4710-01-542-0668 | Metallic Bent Tube |
| NSN 5340-01-542-0712 | Mounting Bracket |
| NSN 5340-01-542-0716 | Blank Panel |
| NSN 5340-01-542-0721 | Angle Bracket |
| NSN 5340-01-542-0731 | Blank Panel |
| NSN 5330-01-542-0877 | Nonmetallic Seal Cap |
| NSN 5310-01-542-0880 | Hexagon Plain Nut |
| NSN 5940-01-542-0898 | Stud Terminal |
| NSN 5310-01-542-0900 | Hexagon Plain Nut |
| NSN 5940-01-542-0904 | Stud Terminal |
| NSN 5940-01-542-0908 | Electr Taper Receptacle Terminal |
| NSN 5340-01-542-1152 | Blank Panel |
| NSN 9520-01-542-1188 | Metal Molding |
| NSN 5330-01-542-1274 | Nonmetallic Seal Cap |
| NSN 5305-01-542-1302 | Machine Screw |
| NSN 5310-01-542-1309 | Flat Washer |
| NSN 5310-01-542-1314 | Flat Washer |
| NSN 5340-01-542-1322 | Blank Panel |
| NSN 5940-01-542-1326 | Electr Taper Receptacle Terminal |
| NSN 5935-01-542-1327 | Electrical Receptacle Connector |
| NSN 5340-01-542-1355 | Metal Grille |
| NSN 5975-01-542-1357 | Interconnecting Box |
| NSN 4130-01-542-1361 | Refrigeration Evaporator Coil |
| NSN 4130-01-542-1365 | Refrigeration Condenser Coil |
| NSN 5340-01-542-1369 | Metal Grille |
| NSN 5305-01-542-1372 | Machine Screw |
| NSN 5940-01-542-1378 | Electr Taper Receptacle Terminal |
A bent hollow item, welded or seamless. It has a round, square or any other cross section, with a continuous periphery. It is primarily designed to convey fluids, gases and/or semisolids. Excludes items of circular cross section which conform in dimensional characteristics to pipe, metallic; elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return. For items with end fittings on one or both ends, see tube assembly, metal.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Seal or plug all openings and preserve by method 10.
Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.
No requirement.
No special type of cargo code applicable.
Metal and metal products, nos, (less than 35 feet).
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 66-9964 | 2 | ZZ | 5 | 43904 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||