change location
321-802-5889
321-733-7477
Model or part number: 7-217221625-7
About this product
Hudraulic directional control valve consists of a solenoid operated non-interflow 2 position 3 way normally closed valve,valve may be direct actingor internally pilot operated;specs mil-h-5440 and mil-h-8775 type ii class 3000 psi systems apply;fluid iaw mil-h-83282 and mil-h-5606;operating pressure 0 to 3000 psi to close,500 to 3000 to open;design temperature limits shall be -65 deg f to +275 deg f in accordance with mil-h-5440 class ii,below- 25 deg f mil-h-5606 fluid will be usedas part of the cold kit;7 ports iaw ms33649;flow shall not be less than 3.5 gpm at a pressure drop of 50 psi;life test 20,000 cycles mil-h-8775;valve shall be designed to permit maint free operation limited only by age mil-std-1523;valve assy shall weigh not more than 2.0 lb dry
Solenoid Valve Cartridge NSN 4810-01-239-4221. Solenoid
NSN 4810-01-239-4221 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5320-00-023-4439 | Pin-rivet Collar |
| NSN 9535-00-684-4140 | Laminated Shim Stock |
| NSN 1270-01-159-7994 | Sensor Surveying Unit |
| NSN 1630-01-160-5614 | Disc Brake Rotor |
| NSN 6610-01-163-7062 | Vertical Velocity Indicator |
| NSN 2835-01-164-5786 | Apu Clutch Assy |
| NSN 6610-01-165-2103 | Air Speed Indicator |
| NSN 6610-01-165-2104 | Vertical Velocity Indicator |
| NSN 1005-01-182-0632 | Upper Slider |
| NSN 1005-01-182-1000 | L.h Forward Twist Chute Assembly |
| NSN 1005-01-182-1001 | Forward Chute Assembly |
| NSN 1005-01-182-1003 | Forward Chute Guide |
| NSN 1005-01-182-1004 | Forward Chute Guide |
| NSN 1005-01-182-1005 | Forward Chute Track |
| NSN 1005-01-182-1006 | Forward Chute Track |
| NSN 1005-01-182-1007 | Left-hand Aft Elbow Track |
| NSN 1005-01-182-1009 | Forward Upper Segment |
| NSN 1005-01-182-1011 | Forward Box End Chute |
| NSN 3040-01-182-3710 | Mechanical Drive Housing |
| NSN 1005-01-182-3723 | Ammuniti Drum Assembly Partition |
| NSN 1005-01-182-3732 | Ammuniti Drum Assembly Partition |
| NSN 5340-01-182-3746 | Rod End Clevis |
| NSN 5365-01-182-4032 | Chain Drive Gear Spacer |
| NSN 5365-01-182-4277 | Plate Spacer |
| NSN 5962-01-182-4297 | Linear Microcircuit |
| NSN 5962-01-182-4299 | Linear Microcircuit |
| NSN 5962-01-182-4304 | Digital Microcircuit |
| NSN 5962-01-182-7633 | Digital Microcircuit |
| NSN 5945-01-182-7637 | Electromagnetic Relay |
| NSN 5340-01-182-7950 | Mounting Bracket |
| NSN 5340-01-182-7951 | Mounting Bracket |
| NSN 1005-01-182-9547 | Adjustment Gear |
| NSN 1005-01-182-9549 | Gun Turret Shield |
| NSN 1005-01-182-9550 | Azimuth Drive Assembly |
| NSN 5935-01-182-9565 | Electrical Connector Bracket |
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes valve (1), butterfly.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Greaseproof-waterproof bag, sealed.
Vendor's protective grease or oil coating.
Solenoid Valves
Industrial Machines, Other
Taps, Cocks, Valves and Similar Appliances, N.e.s.
No special type of cargo code applicable.
Aircraft parts, to include test/tool sets and equipment (other than armament systems).
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 03/17 | 06/17 | 10/18 | 02/19 | 06/19 | 10/19 | 02/20 |
|---|---|---|---|---|---|---|
| 13.00 | 14.00 | 12.00 | 11.00 | 11.00 | 11.00 | 11.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 7-217221625-7 | 1 | ZZ | 5 | 8V613 |
| 7966-1 | 2 | BF | 5 | 04320 |
| 7-217221625-7 | 9 | BF | 1 | 02731 |
| 7-217221625-5 | 9 | BF | 5 | 02731 |
| 110400-1 | 9 | BF | 5 | 05477 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||