4820-00-580-6467

Safety Relief Valve email this page

Images

Reference images of this national stock number

Model or part number: 8LV6122

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Velocity Fuse NSN 4820-00-580-6467.

NSN 4820-00-580-6467 Datasheet

MRC:

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD

Thread Class:

3a 1st end

MRC:

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF

Thread Direction:

Right-hand 1st end

MRC:

The part that controls the flow through the item.ADQU

Flow Control Device:

Poppet

MRC:

Indicates the type of housing on the item that accommodates the stem packing or spring.ADSR

Bonnet Type:

Inside spring

MRC:

The means by which the bonnet is attached to the item.ADST

Bonnet Attachment Method:

Threaded

MRC:

The means of closing the item when inlet pressure decreases.ADSU

Disk Loading Method:

Spring

MRC:

The rated valve discharge capacity per unit of time.ADSY

Valve Discharge Flow Rate:

16.0 gallons per minute

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC

Connection Style:

Flared (tube) 1st end

MRC:

The means used to control the operation of the valve.AQLR

Valve Operation Method:

Automatic

MRC:

Indicates the type of connection/s/.AWLS

Connection Type:

Threaded external tube 1st end

MRC:

Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL

Features Provided:

Pressure tight outlet side

MRC:

The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP

Thready Qty Per Inch (tpi):

12 1st end

MRC:

The minimum to maximum pressures at which the item may be set to open.CQCY

Adjustable Pressure Range:

+200.0/+250.0 pounds per square inch

MRC:

The maximum pressure at which the item is rated for operation.CQGM

Maximum Operating Pressure:

3000.0 pounds per square inch single response

MRC:

A designation that is used for the purpose of general identification of the thread.CQJX

Thread Size:

1.500 inches 1st end

MRC:

The angle of the end surface upon which the mated surface seats.CQRB

Seat Angle:

37.0 degrees 1st end

MRC:

The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD

Outside Diameter Tube Accommodated:

0.750 inches 1st end

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Stainless steel flow control device

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Qq-a-225/6, t4 federal specification single material response seat

MRC:

The type of media for which the item is designed.MEDA

Media For Which Designed:

Hydraulic fluid, phosphate-ester base single response

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Anodize

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC

Surface Treatment Specification:

Mil-a-8625, type 2 military specification single treatment response

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Straight thru

MRC:

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD

Thread Series Designator:

Un 1st end

MRC:

NIIN:

005806467

MRC:

NATO Stock Number:

4820-00-580-6467

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

Yes - DEMIL/MLI
Export Control Information

MRC:

N/A

MIL-STD

MIL-A-8625 Spec.

FIIG:

A046B0

MRC:

INC:

05488

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 4820-00-580-6467

A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes valve (1), relief, pressure and temperature.

Recent Solicitations Most recent solicitations for NSN 4820-00-580-6467

End Date

Solicitation

Qty

Purchase Request

End Date:

2021-10-22

Solicitation:

SPE7MC22T0349

Qty:

Purchase Request:

0091560828

End Date:

2020-04-20

Solicitation:

SPE7MC20T7909

Qty:

Purchase Request:

0084465518

End Date:

2020-01-27

Solicitation:

SPE7MC20T4023

Qty:

Purchase Request:

0083229000

End Date:

2019-10-07

Solicitation:

SPE7MC19T214M

Qty:

Purchase Request:

0081779473

End Date:

2019-01-14

Solicitation:

SPE7MC19T4169

Qty:

Purchase Request:

0077761481

End Date:

2018-07-02

Solicitation:

SPE7MC18T063W

Qty:

Purchase Request:

0075028532

End Date:

2018-03-15

Solicitation:

SPE7MC18T7006

Qty:

Purchase Request:

0073235433

End Date:

2017-10-26

Solicitation:

SPE7MC18T0821

Qty:

Purchase Request:

0071248445

End Date:

2016-07-11

Solicitation:

SPE7M116TAQ30

Qty:

Purchase Request:

0064425303

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.6000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

15Z0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) JC

Astm-d4727, domestic fiberboard used as pads, cells, die cuts or sleeves.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8481400000

NAICS:

332911

End Use Class:

21180

SITC:

74740

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8481400000

Safety Or Relief Valves

End Use Code 21180

Industrial Machines, Other

Standard Intl. Trade Class (SITC) 74740

Safety Or Relief Valves

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

127220

NMF Description:

Pressure Reg/red/relief Valves Noi

UFC:

64490

LTL:

77.5

LCL:

77.5

WCC:

594

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 594

Pumps and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) A

Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) Z

Other or no special handling required (sh)

DLA History / Forecast Quantities

Maritime Supply Chain

06/16	12/16	06/17	05/17	09/17	01/18	05/18	09/18	01/19	08/18	11/18	02/19	05/19	08/19	11/19	02/20	05/20
1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
8LV6122	2	SB	2	26044
20-91028-1	9	SB	2	76301

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

4820-00-580-6467

Images

Pricing & Availability

NSN 4820-00-580-6467 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Recent Solicitations Most recent solicitations for NSN 4820-00-580-6467

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

DLA History / Forecast Quantities

Manufacturers

Compare Now »