change location
321-802-5889
321-733-7477
Model or part number: 12335183
About this product
Steel alloy length 1.437 in. Nom. With 0.809 in. Min. And 0.810 in. Max. Od; four thru holes 0.125 in. Dia. Bored transverse through neck end and other end has two 0.125 in. Nom. Slots each side and centered. A hole is bored through top of neck end 0.092 in. Min. And 0.095 in. Max. Dia. Through top, centered; test data document:c19207-12335183
Body Control Valve NSN 4820-01-183-8362.
NSN 4820-01-183-8362 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 6650-00-973-1176 | Armored Vehicle Periscope |
| NSN 5340-01-022-7474 | Access Cover |
| NSN 3120-01-058-1160 | Sleeve Bearing |
| NSN 4730-01-138-7152 | Quick Disconnect Coupling Half |
| NSN 5310-01-138-9156 | Flat Washer |
| NSN 5365-01-138-9413 | Plate Spacer |
| NSN 3040-01-155-0106 | Shouldered Shaft |
| NSN 4820-01-155-0138 | Directional Control Linear Valve |
| NSN 3040-01-156-8106 | Shouldered Shaft |
| NSN 2510-01-163-2703 | Final Drive R.h. Access Plate |
| NSN 5930-01-163-3197 | Pressure Switch |
| NSN 4810-01-166-6299 | Hydraulic Servovalve |
| NSN 4820-01-167-8051 | Directional Control Linear Valve |
| NSN 2530-01-167-8053 | Veh Power Steering Pump Assembly |
| NSN 4320-01-167-8099 | Axial Pistons Pump |
| NSN 2530-01-167-8106 | Solid Rubber Tire Wheel |
| NSN 5330-01-169-2461 | Plain Encased Seal |
| NSN 2590-01-170-5026 | Hydraulic Accumulator |
| NSN 5340-01-170-9947 | Retaining Band |
| NSN 3120-01-170-9948 | Linear-rotary Motion Roller |
| NSN 2520-01-171-0027 | Transfer Transmission Assembly |
| NSN 2530-01-171-0032 | Steering Wheel |
| NSN 5306-01-171-0048 | Threaded End Rod |
| NSN 5340-01-171-0053 | Angle Bracket |
| NSN 3040-01-171-0087 | Nonrotating Shaft Eye Bracket |
| NSN 3040-01-171-0099 | Shouldered Shaft |
| NSN 2530-01-171-8246 | Hand Throttle Plate |
| NSN 3040-01-171-8265 | Straight Shaft |
| NSN 4820-01-173-4694 | Directional Control Linear Valve |
| NSN 5340-01-175-0584 | Manual Control Lever |
| NSN 2990-01-176-6122 | Push-pull Control Assembly |
| NSN 3040-01-176-9434 | Shouldered Shaft |
| NSN 4320-01-176-9441 | Liquid Pump Housing |
| NSN 5330-01-176-9442 | Mecha Seal Replacement Parts Kit |
| NSN 2530-01-178-3013 | Hand Brake Parts Kit |
An item designed to enclose and support the internalpart(s) of a valve.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Unheated general purpose.
Watervaporproof bag, sealed.
Vendor's protective grease or oil coating.
Parts Of Taps, Cocks, Valves and Similar Appliances, Nesoi
Industrial Machines, Other
Parts For Taps, Cocks, Valves and Similar Appliances For Pipes, Boiler Shells, Tanks, Etc.
No special type of cargo code applicable.
Pumps and parts, (machinery and parts),(less than 35 feet).
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 05/16 |
|---|
| 14.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 12335183 | 2 | AZ | 1 | 19207 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||