change location
321-802-5889
321-733-7477
Model or part number: CUTA1870306C
About this product
The tool set contains a body tool, a pin installation tool, a pin extration tool and a striker and tapset. The first three tools are threaded at the end to engage internal threads of the pin of the valve body as required.The striker slides on the shaft of either of the first two tools and is used to strike the head, thus driving out the pin or valve body. The body tool is used to to push the rfi valve insert firmly into the reamed bore of the valve bodythe pin installation tool is then used to press the expander pin into the valve body so that the external lands bite into the cavity wall to seal and lock the insert into place. The body insert of some lee check valves normally removed using this set may not be threaded. The tapset is provided so that the insere can be threaded to accomodate the threads of the body tool when removal of the insert is necessary
NSN 4920-01-489-1424 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
No special marking.
Heated general purpose - heated 40 f and above.
Greaseproof-waterproof bag, sealed.
Astm-d4727, domestic fiberboard used as pads, cells, die cuts or sleeves.
Vendor's protective grease or oil coating.
No special type of cargo code applicable.
Test measurement, and diagnostic equipment (tmde), repair parts and components.
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| CUTA1870306C | 2 | KE | 3 | 92555 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||