NSN 5305-00-267-8953

Description: Hexagon Head Cap Screw / Tap Bolt email this page

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

Images

Reference images of this NSN
Reference of NSN 5305-00-267-8953 Reference of NSN 5305-00-267-8953

pdf 5305-00-267-8953 Datasheet

MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.625 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.150 inches and 0.163 inches
MRC:
None.AATB
Width Between Flats:
Between 0.428 inches and 0.438 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mrap - cougar CAT1 A1; mrap - cougar iss 1.0
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Finished head
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
150000 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
32.0 Rockwell c and 38.0 Rockwell c
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
120000 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
SAEJ429GRADE8 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Astm B633 type 2 sc 3 assn standard single treatment response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
2 type and 10P style and 8 grade
MRC:
--
NIIN:
002678953
MRC:
--
NSN:
5305002678953
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
1 HD
MRC:
--
DEMIL:
No
MRC:
--
Hazmat:
No
MRC:
--
Repairability:
This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
FIIG:
--
FIIG:
A003B0
MRC:
--
INC:
18257
MRC:
--
IMM:
KZ

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

End Items and Platforms

End items to which this NSN is a component of.
  • Electronic Equipment Shipping And Storage Container
  • Fire Fighting Truck
  • Ambulance Truck
  • Power Supply
  • Air Conditioner
  • Cargo Carrier
  • Rotary Pump
  • Communications Central
  • Mast
  • Fire Direction Cent
  • Tracked Ammunition Carrier

Formal Definition

NSN 5305-00-267-8953

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

End Users MOE: Major organizational entities

Name
MOE Code Major organizational entity (MOE) code
MOE Rule A four position code that reflects management responsibility within participating military services, civil agencies, NATO and other foreign countries.
PICA A code indicating the principal supply control activity responsible for establishing stockage objectives, controlling stockage objectives and maintaining item accountability for an item of supply. Short title- pica. Formerly-wholesale inventory manager
DSOR Depot source of repair (DSOR) code to maintenance activity cross reference identifies those activities that are approved to perform depot level maintenance for the services.
User:
DEPARTMENT OF THE ARMY Department of the Army
MOE:
DA
Rule:
A919
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Department of the Air Force
MOE:
DF
Rule:
FXGI
PICA:
GX
DSOR:
User:
U.S. MARINE CORPS U.s. Marine Corps
MOE:
DM
Rule:
MC47
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Department of the Navy
MOE:
DN
Rule:
N9BZ
PICA:
GX
DSOR:
User:
U.S. COAST GUARD U.s. Coast Guard
MOE:
GP
Rule:
C918
PICA:
GX
DSOR:
User:
AUSTRIA Austria
MOE:
WB
Rule:
WB01
PICA:
WB
DSOR:
User:
LITHUANIA Lithuania
MOE:
WI
Rule:
WI01
PICA:
WI
DSOR:
User:
POLAND Poland
MOE:
WP
Rule:
WP01
PICA:
WP
DSOR:
User:
BULGARIA Bulgaria
MOE:
WU
Rule:
WU01
PICA:
WU
DSOR:
User:
BRAZIL Brazil
MOE:
YA
Rule:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE:
YB
Rule:
YB01
PICA:
YB
DSOR:
User:
SINGAPORE Singapore
MOE:
YJ
Rule:
YJ01
PICA:
YJ
DSOR:
User:
MOROCCO Morocco
MOE:
YP
Rule:
YP01
PICA:
YP
DSOR:
User:
MALAYSIA Malaysia
MOE:
YW
Rule:
YW01
PICA:
YW
DSOR:
User:
AUSTRALIA Australia
MOE:
ZA
Rule:
ZA01
PICA:
ZA
DSOR:
User:
BELGIUM Belgium
MOE:
ZB
Rule:
ZB01
PICA:
ZB
DSOR:
User:
CANADA Canada
MOE:
ZC
Rule:
ZC01
PICA:
ZC
DSOR:
User:
NEW ZEALAND New Zealand
MOE:
ZE
Rule:
ZE01
PICA:
ZE
DSOR:
User:
FRANCE France
MOE:
ZF
Rule:
ZF01
PICA:
ZF
DSOR:
User:
GERMANY Germany
MOE:
ZG
Rule:
ZG01
PICA:
ZG
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE:
ZH
Rule:
ZH01
PICA:
ZH
DSOR:
User:
UNITED KINGDOM United Kingdom
MOE:
ZK
Rule:
ZK01
PICA:
ZK
DSOR:
User:
PHILIPPINES Philippines
MOE:
ZM
Rule:
ZM01
PICA:
ZM
DSOR:
User:
NETHERLANDS Netherlands
MOE:
ZN
Rule:
ZN01
PICA:
ZN
DSOR:
User:
PORTUGAL Portugal
MOE:
ZP
Rule:
ZP01
PICA:
ZP
DSOR:
User:
ITALY Italy
MOE:
ZR
Rule:
ZR01
PICA:
ZR
DSOR:
User:
DENMARK Denmark
MOE:
ZS
Rule:
ZS01
PICA:
ZS
DSOR:
User:
GREECE Greece
MOE:
ZU
Rule:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE:
ZW
Rule:
ZW01
PICA:
ZW
DSOR:

Material & Special Handling

Hazmat, Precious Metals, Criticality, Enviroment, and ESD
HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
ADPE:
0
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
1.4000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
10
PKG:
27A0
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7318152000
NAICS:
332722
End Use Class:
12110
SITC:
69421
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7318152000

Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment

End Use Code 12110

Iron and Steel Products, Other

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
093486
NMF Description:
Noi (sub 3) Nuts Or Screws Bolts
UFC:
48950
LTL:
Rating variable
LCL:
--
WCC:
713
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Industrial Hardware Supply Chain
12/16
29700.00

Management

Management codes by department

Historical pricing for this NSN is between 12.42 and 13.80 USD.
Depending on quantity, availability, condition, lead time, and possible discontinuation of an item, we cannot guarantee pricing until we provide you an up to date quote.

Department Of The Army

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE: Z
MGMT CTL: T2200X-
USC: A
REC REP CODE DESC: THIS IS A NONREPARABLE ITEM. IF CONDEMNED OR ECONOMICALLY UNSERVICEABLE, THEN DISPOSE AT THE LEVEL AUTHORIZED REPLACE THE ITEM.

Department Of The Air Force

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE: N
MGMT CTL: SF9SX-V
USC: F
REC REP CODE DESC:

U.s. Marine Corps

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE: Z
MGMT CTL: 15B2K--
USC: M
REC REP CODE DESC: THIS IS A NONREPARABLE ITEM. IF CONDEMNED OR ECONOMICALLY UNSERVICEABLE, THEN DISPOSE AT THE LEVEL AUTHORIZED REPLACE THE ITEM.

Department Of The Navy

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE:
MGMT CTL: 9B-----
USC: N
REC REP CODE DESC:

Defense Logistics Agency

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE: N
MGMT CTL: -------
USC: I
REC REP CODE DESC:

U.s. Coast Guard

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE:
MGMT CTL: -------
USC: C
REC REP CODE DESC:
Compare Now »
Clear | Hide