NSN 5305-00-808-3282

Description: Machine Screw / Bolt Stove email this page

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

Images

Reference images of this NSN
Reference of NSN 5305-00-808-3282 Reference of NSN 5305-00-808-3282
Description

Machine Screw NSN 5305-00-808-3282. Screw

pdf 5305-00-808-3282 Datasheet

MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 0.262 inches and 0.312 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 0.281 inches and 0.312 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat countersunk
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.177 inches and 0.225 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Torque set
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.112 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
40
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
160000 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 36.0 Rockwell c and 40.0 Rockwell c
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
Between 99.0 degrees and 101.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the screw is fabricated.CYAU
Screw Material:
Steel comp E4340 or steel comp 2340 or steel comp 8740 or steel comp 8630 or steel comp 6150 or steel comp 4140 or steel comp 4037
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.CYAW
Screw Material Specification:
MIL-S-5000 military specification 1ST material response or MIL-S-6049 military specification 2ND material response or MIL-S-6098 military specification 3RD material response or MIL-S-8503 military specification 4TH material response or MIL-S-5626 military specification 5TH material response or ams 6300 assn standard 6TH material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.CYBA
Screw Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.CYBE
Screw Surface Treatment Specification:
QQ-P-416, type 2, cl 3 federal specification all treatment responses
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
MRC:
--
NIIN:
008083282
MRC:
--
NSN:
5305008083282
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
100 EA
MRC:
--
DEMIL:
No
MRC:
--
Hazmat:
No
MRC:
N/A
MIL-STD
MRC:
--
Repairability:
This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
FIIG:
--
FIIG:
A500D0
MRC:
--
INC:
06657
MRC:
--
IMM:
KZ

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

End Items and Platforms

End items to which this NSN is a component of.
  • Take Panel Assembly
  • Quadrant Control Assembly
  • D Receiver Assembly
  • Aircraft Ejection Seat
  • Power Supply
  • Power Distribution Panel
  • Electrical-electronic Equipment Chassis
  • Assembly Enclosure
  • Reference Pedestal
  • Target Receiver Ass
  • Data Panel Assembly
  • Aircraft Pylon
  • Test Set Arm Assy
  • Control Panel Assem
  • Transponder Receive

Formal Definition

NSN 5305-00-808-3282

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.

End Users MOE: Major organizational entities

Name
MOE Code Major organizational entity (MOE) code
MOE Rule A four position code that reflects management responsibility within participating military services, civil agencies, NATO and other foreign countries.
PICA A code indicating the principal supply control activity responsible for establishing stockage objectives, controlling stockage objectives and maintaining item accountability for an item of supply. Short title- pica. Formerly-wholesale inventory manager
DSOR Depot source of repair (DSOR) code to maintenance activity cross reference identifies those activities that are approved to perform depot level maintenance for the services.
User:
DEPARTMENT OF THE AIR FORCE Department of the Air Force
MOE:
DF
Rule:
FXGI
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Department of the Navy
MOE:
DN
Rule:
N9BZ
PICA:
GX
DSOR:
User:
POLAND Poland
MOE:
WP
Rule:
WP01
PICA:
WP
DSOR:
User:
BRAZIL Brazil
MOE:
YA
Rule:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE:
YB
Rule:
YB01
PICA:
YB
DSOR:
User:
SINGAPORE Singapore
MOE:
YJ
Rule:
YJ01
PICA:
YJ
DSOR:
User:
MALAYSIA Malaysia
MOE:
YW
Rule:
YW01
PICA:
YW
DSOR:
User:
AUSTRALIA Australia
MOE:
ZA
Rule:
ZA01
PICA:
ZA
DSOR:
User:
BELGIUM Belgium
MOE:
ZB
Rule:
ZB01
PICA:
ZB
DSOR:
User:
CANADA Canada
MOE:
ZC
Rule:
ZC01
PICA:
ZC
DSOR:
User:
FRANCE France
MOE:
ZF
Rule:
ZF01
PICA:
ZF
DSOR:
User:
GERMANY Germany
MOE:
ZG
Rule:
ZG01
PICA:
ZG
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE:
ZH
Rule:
ZH01
PICA:
ZH
DSOR:
User:
UNITED KINGDOM United Kingdom
MOE:
ZK
Rule:
ZK01
PICA:
ZK
DSOR:
User:
PORTUGAL Portugal
MOE:
ZP
Rule:
ZP01
PICA:
ZP
DSOR:
User:
ITALY Italy
MOE:
ZR
Rule:
ZR01
PICA:
ZR
DSOR:
User:
DENMARK Denmark
MOE:
ZS
Rule:
ZS01
PICA:
ZS
DSOR:
User:
NORWAY Norway
MOE:
ZT
Rule:
ZT01
PICA:
ZT
DSOR:
User:
GREECE Greece
MOE:
ZU
Rule:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE:
ZW
Rule:
ZW01
PICA:
ZW
DSOR:

Material & Special Handling

Hazmat, Precious Metals, Criticality, Enviroment, and ESD
HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
XX
MOP:
10
PKG:
27A0
PRES MAT:
00
WRAP MAT:
XX
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7318152000
NAICS:
332722
End Use Class:
12110
SITC:
69421
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7318152000

Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment

End Use Code 12110

Iron and Steel Products, Other

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
093486
NMF Description:
Noi (sub 3) Nuts Or Screws Bolts
UFC:
48950
LTL:
Rating variable
LCL:
--
WCC:
713
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Management

Management codes by department

Historical pricing for this NSN is between 0.57 and 0.63 USD.
Depending on quantity, availability, condition, lead time, and possible discontinuation of an item, we cannot guarantee pricing until we provide you an up to date quote.

Department Of The Army

SOS: SMS
AAC: V
SLC: 0
CIIC: U
REC REP CODE: Z
MGMT CTL: T2200X-
USC: A
REC REP CODE DESC: THIS IS A NONREPARABLE ITEM. IF CONDEMNED OR ECONOMICALLY UNSERVICEABLE, THEN DISPOSE AT THE LEVEL AUTHORIZED REPLACE THE ITEM.

Department Of The Air Force

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE: N
MGMT CTL: SF9SX-V
USC: F
REC REP CODE DESC:

Department Of The Navy

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE:
MGMT CTL: 9B-----
USC: N
REC REP CODE DESC:

Defense Logistics Agency

SOS: SMS
AAC: D
SLC: 0
CIIC: U
REC REP CODE: N
MGMT CTL: -------
USC: I
REC REP CODE DESC:
Compare Now »
Clear | Hide