5305-01-534-6928

Hexagon Head Cap Screw email this page

Images

Reference images of this national stock number
Reference of NSN 5305-01-534-6928 Reference of NSN 5305-01-534-6928

Model or part number: NASM35307-415S316

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Tap Bolt NSN 5305-01-534-6928. Screw, hex head 316

pdf NSN 5305-01-534-6928 Datasheet

MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
2.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.302 inches and 0.323 inches
MRC:
None.AATB
Width Between Flats:
Between 0.736 inches and 0.750 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-502-0586 expeditionary fighting vehicle
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
13
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
11300 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
O/a body diameter: 0.493-0.500 in; width across corners: 0.840-0.866 in; radius: 0.015-0.025 in
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
MRC:
--
NIIN:
015346928
MRC:
--
NATO Stock Number:
5305-01-534-6928
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A003B0
MRC:
--
INC:
18257
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Expeditionary Fighting Vehicle P NSN 2350-01-502-0586 Parts and components for this end application.

NSN Component Description
NSN 1005-01-529-9513 Automatic Gun Barrel
NSN 1005-01-529-9517 30 Millimeter Automatic Gun
NSN 1005-01-529-9524 Efv Gun Control Unit
NSN 5998-01-532-7490 Circuit Card Assembly
NSN 5855-01-532-7505 Thermal Imaging Syst Sensor Unit
NSN 5855-01-532-7513 Thermal Imaging Sys Display Unit
NSN 6105-01-532-7799 Electric Motor Assembly
NSN 6105-01-532-7802 Electric Motor Assembly
NSN 6105-01-532-7815 Mc400 Control Motor Control Unit
NSN 2530-01-534-2381 Azimuth Spring Actuator Assembly
NSN 1005-01-534-2631 Index Drive Housing Assembly
NSN 5999-01-534-2638 Brkout Elec
NSN 6150-01-534-2662 Electrical Power Cable Assembly
NSN 1005-01-534-2669 Bore Sight Adapter
NSN 2590-01-534-4310 Gunner Knee Guard
NSN 3040-01-534-4311 Electrical-fl Connector Assembly
NSN 3110-01-534-4318 Tapered Roller Bearing
NSN 3110-01-534-4330 Tapered Roller Bearing
NSN 3110-01-534-4332 Thrust Ball Bearing
NSN 5365-01-534-6453 Shim
NSN 5342-01-534-6464 Weapon System Resilient Mount
NSN 6140-01-534-6466 Storage Battery
NSN 5342-01-534-6472 Weapon System Resilient Mount
NSN 5342-01-534-6475 Weapon System Resilient Mount
NSN 5342-01-534-6489 Weapon System Resilient Mount
NSN 5365-01-534-6492 Nonmetallic Bushing
NSN 5340-01-534-6517 Block Clamp
NSN 5340-01-534-6525 Block Clamp
NSN 5340-01-534-6540 Wedge Block
NSN 5325-01-534-6549 Retaining Ring
NSN 5330-01-534-6550 Gasket
NSN 2590-01-534-6782 Azimuth Lock Assembly
NSN 2590-01-534-6783 Azimuth Manual Drive Connector
NSN 3020-01-534-6784 Spur Gear
NSN 2590-01-534-6785 Azimuth Manual Drive Arm

Formal Definition

Government issue definition of NSN 5305-01-534-6928

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

Recent Solicitations Most recent solicitations for NSN 5305-01-534-6928

End Date
Solicitation
Qty
Purchase Request
End Date:
2024-03-20
Solicitation:
SPE4A624T17T8
Qty:
249
Purchase Request:
7006687392
End Date:
2017-07-07
Solicitation:
SPE5E217TB793
Qty:
228
Purchase Request:
0069650739
End Date:
2015-11-09
Solicitation:
SPE5E216T1697
Qty:
26
Purchase Request:
0061038449
End Date:
2015-10-15
Solicitation:
SPE5E216T0134
Qty:
39
Purchase Request:
0060699942
End Date:
2015-05-26
Solicitation:
SPE5E015T2274
Qty:
4
Purchase Request:
0058484121

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
XX
MOP:
10
PKG:
01A0
PRES MAT:
00
WRAP MAT:
XX
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7318152000
NAICS:
332722
End Use Class:
12110
SITC:
69421
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7318152000

Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment

End Use Code 12110

Iron and Steel Products, Other

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
096640
NMF Description:
Iron Or Steel Screws
UFC:
50600
LTL:
70.0
LCL:
--
WCC:
573
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 573

Bolts or nuts (iron or steel),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Industrial Hardware Supply Chain
04/1607/1603/18
39.0025.00200.00

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide