5305-01-597-1450

Hexagon Head Cap Screw email this page

Images

Reference images of this national stock number
Reference of NSN 5305-01-597-1450 Reference of NSN 5305-01-597-1450

Model or part number: 90113A169

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

About this product
Finish: plain;tip type: flat point

Description

Tap Bolt NSN 5305-01-597-1450.

pdf NSN 5305-01-597-1450 Datasheet

MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.250 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
1.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.4375 inches
MRC:
None.AATB
Width Between Flats:
0.625 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2355-01-539-3589; light armored vehicle
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
80000 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
75.0 rockwell b
MRC:
The name assigned to the item by the government agency or commercial organization controlling the design of the item.CXCY
Product Name:
Screw, thumb
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel and steel property class 18.8
MRC:
--
NIIN:
015971450
MRC:
--
NATO Stock Number:
5305-01-597-1450
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A003B0
MRC:
--
INC:
18257
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Light Armored Vehicle NSN 2355-01-539-3589 Parts and components for this end application.

NSN Component Description
NSN 2541-01-561-0906 Ballistic Protection Upgrade Kit
NSN 5895-01-568-0118 Electronic Equi Installation Kit
NSN 5940-01-584-1460 Lug Terminal
NSN 4720-01-584-1481 Nonmetallic Tubing
NSN 4730-01-584-4130 Pipe To Tube Tee
NSN 2540-01-584-4164 Pedestal Chair
NSN 3040-01-584-4242 Mount Rack Jack Screw
NSN 4720-01-584-4303 Nonmetallic Hose
NSN 4720-01-584-4316 Nonmetallic Hose
NSN 4710-01-584-4700 Metallic Tube And Fittings
NSN 4710-01-584-4705 Metallic Tube And Fittings
NSN 4710-01-584-4744 Metallic Bent Tube
NSN 4710-01-584-4762 Metallic Bent Tube
NSN 5340-01-584-4790 Dagr Mount Assembly
NSN 4730-01-584-4808 Tube Reducer
NSN 4730-01-584-5096 Pipe To Tube Straight Adapter
NSN 4820-01-584-5189 Ported Valve Ball
NSN 5930-01-584-5241 Switch Guard
NSN 5930-01-584-5286 Switch Guard
NSN 4030-01-584-5560 Captive Pin
NSN 3040-01-584-5575 Ball Joint
NSN 2540-01-584-5613 Rearview Mirror Arm
NSN 3040-01-584-5627 Ball Joint
NSN 5970-01-584-5713 Electrical Insulation Sleeving
NSN 6150-01-584-5761 E Special Purpose Cable Assembly
NSN 6145-01-584-5804 Electrical Power Cable
NSN 5970-01-584-6077 Electrical Insulation Sleeving
NSN 6150-01-584-6115 E Special Purpose Cable Assembly
NSN 6150-01-584-6129 Electrical Power Cable Assembly
NSN 6150-01-584-6305 E Special Purpose Cable Assembly
NSN 5970-01-584-6365 Electrical Insulation Sleeving
NSN 6150-01-584-6430 E Special Purpose Cable Assembly
NSN 6150-01-584-6852 E Special Purpose Cable Assembly
NSN 6150-01-584-6873 E Special Purpose Cable Assembly
NSN 6150-01-584-6923 Storage Battery Lead

Formal Definition

Government issue definition of NSN 5305-01-597-1450

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

Recent Solicitations Most recent solicitations for NSN 5305-01-597-1450

End Date
Solicitation
Qty
Purchase Request
End Date:
2022-12-28
Solicitation:
SPE4A623T344V
Qty:
198
Purchase Request:
7000987695
End Date:
2019-12-20
Solicitation:
SPE5E820T3209
Qty:
123
Purchase Request:
0082840318
End Date:
2015-06-17
Solicitation:
SPE5E215TA963
Qty:
107
Purchase Request:
0058756249

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
10
PKG:
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7318152000
NAICS:
332722
End Use Class:
12110
SITC:
69421
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7318152000

Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment

End Use Code 12110

Iron and Steel Products, Other

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
096640
NMF Description:
Iron Or Steel Screws
UFC:
50600
LTL:
70.0
LCL:
--
WCC:
573
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 573

Bolts or nuts (iron or steel),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Industrial Hardware Supply Chain
10/1510/17
100.00100.00

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide