5305-01-611-4019

Hexagon Head Cap Screw email this page

Images

Reference images of this national stock number
Reference of NSN 5305-01-611-4019

Model or part number: 92323A510

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

About this product
Underside of extended washer is serrated

Description

Tap Bolt NSN 5305-01-611-4019.

pdf NSN 5305-01-611-4019 Datasheet

MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.250 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon extended washer
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.281 inches
MRC:
None.AATB
Width Between Flats:
0.375 inches
MRC:
None.AATC
Extended Washer Diameter:
0.5625 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2355-01-567-4930
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
120000 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
25.0 rockwell c
MRC:
The name assigned to the item by the government agency or commercial organization controlling the design of the item.CXCY
Product Name:
Vibrationpresistant flange head hex head cap screw
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
--
NIIN:
016114019
MRC:
--
NATO Stock Number:
5305-01-611-4019
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A003B0
MRC:
--
INC:
18257
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Bomb Service Truck NSN 2355-01-567-4930 Parts and components for this end application.

NSN Component Description
NSN 5330-01-578-6964 Plain Encased Seal
NSN 2520-01-578-6966 Automotive Axle Shaft
NSN 5310-01-578-6973 Hexagon Plain Nut
NSN 5325-01-578-6976 Retaining Ring
NSN 5305-01-578-6991 Hexagon Head Cap Screw
NSN 4320-01-579-0799 Centrifugal Pump Impeller
NSN 5330-01-579-1680 Plain Encased Seal
NSN 5306-01-579-1707 Machine Bolt
NSN 5305-01-579-1783 Hexagon Head Cap Screw
NSN 4330-01-579-2100 Fluid Filter Head
NSN 2520-01-579-2138 Vehicular Unive Companion Flange
NSN 3130-01-579-2166 Bearing Unit Housing
NSN 2520-01-579-2177 Vehicular Unive Companion Flange
NSN 2510-01-579-2223 Suspension Torsion Bar Parts Kit
NSN 2530-01-579-2353 Shoe Type Brake
NSN 2530-01-579-2369 Brake Lining Kit
NSN 5315-01-579-2377 Headless Straight Pin
NSN 5360-01-579-3184 Extension Helical Spring
NSN 3120-01-579-3189 Sleeve Bearing
NSN 2530-01-579-3200 Brake Slack Adjuster
NSN 2510-01-579-3227 Vehicle Spring Hanger
NSN 2510-01-579-3392 Vehicle Spring Hanger
NSN 5306-01-579-3442 Ribbed Shoulder Bolt
NSN 5331-01-579-4690 O-ring
NSN 5310-01-579-4691 Flat Washer
NSN 5331-01-579-5591 O-ring
NSN 5331-01-579-5597 O-ring
NSN 5310-01-579-6937 Flat Washer
NSN 5306-01-579-6943 Machine Bolt
NSN 5310-01-579-6947 Hexagon Self-locking Nut
NSN 5310-01-579-6956 Flat Washer
NSN 5306-01-579-7920 Machine Bolt
NSN 5306-01-579-7925 Machine Bolt
NSN 5306-01-579-7947 Machine Bolt
NSN 5306-01-579-7955 Machine Bolt

Formal Definition

Government issue definition of NSN 5305-01-611-4019

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
XX
MOP:
10
PKG:
60Z0
PRES MAT:
00
WRAP MAT:
XX
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7318152000
NAICS:
332722
End Use Class:
12110
SITC:
69421
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7318152000

Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment

End Use Code 12110

Iron and Steel Products, Other

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
096640
NMF Description:
Iron Or Steel Screws
UFC:
50600
LTL:
70.0
LCL:
--
WCC:
573
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 573

Bolts or nuts (iron or steel),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide