5310-00-042-5876

Key Washer email this page

Images

Reference images of this national stock number

Model or part number: 02-15442

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Rod End Washer NSN 5310-00-042-5876.

NSN 5310-00-042-5876 Datasheet

MRC:

The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB

Hole Diameter:

Between 0.952 inches and 0.957 inches

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV

Outside Diameter:

Between 1.104 inches and 1.109 inches

MRC:

None.ABLC

External Straight Key Width:

Between 0.150 inches and 0.160 inches

MRC:

The measurement from one flat surface of the key to the opposite flat surface.ABLJ

Internal Straight Key Width:

Between 0.150 inches and 0.160 inches

MRC:

None.ABLQ

Distance From Centerline To Top Of Internal Key:

Between 0.3995 inches and 0.4020 inches

MRC:

None.ABLX

Overall Distance Including Keys:

Between 1.225 inches and 1.235 inches

MRC:

None.ABMQ

External Key Quantity:

MRC:

The number of internal keys included.ABMR

Internal Key Quantity:

MRC:

A measurement of the smallest dimension of the material,in distinction from length or width.ABPX

Material Thickness:

Between 0.106 inches and 0.110 inches

MRC:

The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC

Min. Tensile Strength (psi):

100000 pounds per square inch

MRC:

A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM

Hardness Rating:

23.0 rockwell c

MRC:

A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT

Heat Treatment:

As fabricated

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Stainless steel

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Key

MRC:

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST

Test Data Document:

81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

MRC:

NIIN:

000425876

MRC:

NATO Stock Number:

5310-00-042-5876

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A022B0

MRC:

INC:

01869

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5310-00-042-5876

A washer of nonresilient material usually having two parallel bearing surfaces. The outside and/or inside edges have one or more protuberances. The ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. The keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. Excludes thrust type washer.

Recent Solicitations Most recent solicitations for NSN 5310-00-042-5876

End Date

Solicitation

Qty

Purchase Request

End Date:

2021-12-13

Solicitation:

SPE4A622T265M

Qty:

Purchase Request:

0092041161

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

01A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7318220000

NAICS:

332722

End Use Class:

12300

SITC:

69422

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7318220000

Washers Other Than Lock Washers, Iron Or Steel

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69422

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Not Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

194160

NMF Description:

Iron Or Steel Washer Or Gaskets

UFC:

55210

LTL:

50.0

LCL:

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
02-15442	2	CT	1	99167
02-15442	2	ZZ	A	45934

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5310-00-042-5876

Images

Pricing & Availability

NSN 5310-00-042-5876 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Recent Solicitations Most recent solicitations for NSN 5310-00-042-5876

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »