5310-00-094-1761

Sleeve Nut email this page

Images

Reference images of this national stock number

Model or part number: 1116934

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
16 holes around flange 0.156 in. Dia

NSN 5310-00-094-1761 Datasheet

MRC:

The minimum and maximum pitch diameter limits of a straight screw thread.AAJE

Thread Pitch Diameters:

+0.5625/+0.5665 inches

MRC:

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF

Thread Direction:

Right-hand

MRC:

The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK

Flange Diameter:

2.000 inches

MRC:

A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU

Flange Thickness:

0.156 inches

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA

Nut Style:

Sleeve

MRC:

None.ACTD

Nut Diameter:

Between 0.500 inches and 0.506 inches

MRC:

A measurement of the longest dimension of the nut,in distinction from width.ACVN

Nut Length:

1.062 inches

MRC:

The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP

Drilled Hole Diameter:

Between 0.161 inches and 0.164 inches

MRC:

Indicates the type and number of holes provided.ALET

Hole Type And Quantity:

16 drilled

MRC:

The geometric configuration of the item when viewed in cross section.ANLR

Cross-sectional Shape:

Round

MRC:

A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR

Thread Series:

Unc

MRC:

The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP

Thready Qty Per Inch (tpi):

MRC:

A designation that is used for the purpose of general identification of the thread.CQJX

Thread Size:

0.562 inches

MRC:

The style designation that most nearly corresponds to the appearance of the hole configuration.CRHC

Hole Configuration Style:

Configuration j

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Copper alloy

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Qq-b-636 federal specification single material response

MRC:

NIIN:

000941761

MRC:

NATO Stock Number:

5310-00-094-1761

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A021A0

MRC:

INC:

29735

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5310-00-094-1761

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes nut (1), plain, cap. See also turnbuckle body.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7415290000

NAICS:

332722

End Use Class:

12300

SITC:

69432

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7415290000

Copper Screws, Nuts, Bolts, Rivets, and Other Fasteners Not Threaded

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69432

Washers (including Spring Washers) and Similar Articles, Not Threaded, Of Copper

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

093460

NMF Description:

Bolts/nuts Noi Bbc/zinc

UFC:

48930

LTL:

70.0

LCL:

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
1116934	2	KZ	2	88277
1116934	9	KZ	2	18355

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5310-00-094-1761

Images

Pricing & Availability

NSN 5310-00-094-1761 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »