5310-00-118-0015

Round Plain Nut email this page

Images

Reference images of this national stock number

Model or part number: 2220035

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
Tapped for setscrew on periphery

Description

Worm Wheel Nut NSN 5310-00-118-0015.

NSN 5310-00-118-0015 Datasheet

MRC:

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD

Thread Class:

MRC:

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF

Thread Direction:

Right-hand

MRC:

The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY

Counterbore Diameter:

1.120 inches nut

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA

Nut Style:

Round

MRC:

None.ACTD

Nut Diameter:

1.500 inches

MRC:

A measurement between the opposite flat surfaces of the nut,in distinction from length or width.ADBG

Nut Thickness:

0.500 inches

MRC:

Indicates the type and number of holes provided.ALET

Hole Type And Quantity:

1 tapped

MRC:

A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR

Thread Series:

Uns

MRC:

The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP

Thready Qty Per Inch (tpi):

MRC:

A designation that is used for the purpose of general identification of the thread.CQJX

Thread Size:

1.000 inches

MRC:

The number of hole threads per linear inch measured on a line parallel to the thread axis.CQTW

Hole Thready Qty Per Inch (tpi):

MRC:

The style designation that most nearly corresponds to the appearance of the hole configuration.CRHC

Hole Configuration Style:

Configuration f

MRC:

The included angle of the countersink.CRSQ

Countersink Angle:

90.0 degrees nut

MRC:

The nominal length of a straight line which passes through the center of the threaded hole,and terminates at the circumference.CSPF

Hole Thread Diameter:

0.190 inches

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel comp 1010 or steel comp 1012 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Sae assn standard all material responses

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Phosphate manganese

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC

Surface Treatment Specification:

Mil-p-16232, ty m, cl 2 military specification single treatment response

MRC:

NIIN:

001180015

MRC:

NATO Stock Number:

5310-00-118-0015

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

MRC:

N/A

MIL-STD

MIL-P-16232 Spec.

FIIG:

A021A0

MRC:

INC:

15887

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5310-00-118-0015

A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. See also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

01A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7318160000

NAICS:

332722

End Use Class:

12300

SITC:

69421

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7318160000

Nuts Of Iron Or Steel

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

093486

NMF Description:

Noi (sub 3) Nuts Or Screws Bolts

UFC:

48950

LTL:

Rating variable

LCL:

WCC:

573

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 573

Bolts or nuts (iron or steel),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 10001

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
2220035	9	HD	2	10001

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5310-00-118-0015

Images

Pricing & Availability

NSN 5310-00-118-0015 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »