5310-00-415-5431

Sleeve Nut email this page

Images

Reference images of this national stock number

Model or part number: 091-63327

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

NSN 5310-00-415-5431 Datasheet

MRC:

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD

Thread Class:

MRC:

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF

Thread Direction:

Right-hand

MRC:

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA

Thread Length:

0.430 inches

MRC:

The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY

Counterbore Diameter:

0.088 inches and 0.092 inches nut

MRC:

The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK

Flange Diameter:

Between 0.205 inches and 0.215 inches

MRC:

A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU

Flange Thickness:

0.070 inches

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA

Nut Style:

Sleeve

MRC:

None.ACTD

Nut Diameter:

Between 0.130 inches and 0.135 inches

MRC:

A measurement of the longest dimension of the nut,in distinction from width.ACVN

Nut Length:

0.430 inches

MRC:

The measurement of the enlarged portion adjacent to the threaded portion of a nut,in distinction from height.ADFK

Nut Counterbore Depth:

0.070 inches nut

MRC:

The geometric configuration of the item when viewed in cross section.ANLR

Cross-sectional Shape:

Round nut

MRC:

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ

Tempurature Rating:

Not rated

MRC:

A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR

Thread Series:

Unc

MRC:

The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP

Thready Qty Per Inch (tpi):

MRC:

A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM

Hardness Rating:

Not rated

MRC:

A designation that is used for the purpose of general identification of the thread.CQJX

Thread Size:

0.086 inches

MRC:

The included angle of the countersink.CRSQ

Countersink Angle:

107.0 degrees and 113.0 degrees nut

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel comp 316

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Qq-s-763, cond a federal specification single material response

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Passivate

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC

Surface Treatment Specification:

E+1204, fscm 94697 mfr ref single treatment response

MRC:

NIIN:

004155431

MRC:

NATO Stock Number:

5310-00-415-5431

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A021A0

MRC:

INC:

29735

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5310-00-415-5431

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes nut (1), plain, cap. See also turnbuckle body.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

01A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7318160000

NAICS:

332722

End Use Class:

12300

SITC:

69421

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7318160000

Nuts Of Iron Or Steel

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

093486

NMF Description:

Noi (sub 3) Nuts Or Screws Bolts

UFC:

48950

LTL:

Rating variable

LCL:

WCC:

576

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 576

Metal and metal products, nos, (less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 94697

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
091-63327	2	SB	2	94697

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5310-00-415-5431

Images

Pricing & Availability

NSN 5310-00-415-5431 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »