Model or part number: ISO 7089-8-200HV-A2J
Riveting Burr NSN 5310-01-557-4612.
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
NSN | Component Description |
---|---|
NSN 4010-00-684-0233 | Weldless Chain |
NSN 3040-01-396-1185 | Nonaircraft Mechanical Actuator |
NSN 2540-01-396-2826 | Compartment Vehicular Heater |
NSN 6150-01-397-6975 | Branched Wiring Harness |
NSN 2540-01-407-2396 | Vehicular Electrical Control Box |
NSN 5930-01-410-7033 | Switch Guard |
NSN 2510-01-415-3160 | Vehicular Suspen Strut Cartridge |
NSN 9320-01-415-7835 | Rubber Strip |
NSN 4730-01-416-9642 | Boss Elbow |
NSN 6695-01-418-7690 | Indicator Panel |
NSN 2510-01-418-9536 | Vehicle Hatch Door |
NSN 2540-01-420-7123 | Vehicular Door Handle |
NSN 9905-01-420-7516 | Identification Plate |
NSN 2540-01-420-8626 | Vehicular Insulation |
NSN 2540-01-420-8627 | Vehicular Insulation |
NSN 2540-01-420-9970 | Vehicular Insulation |
NSN 4710-01-421-0130 | Metallic Bent Tube |
NSN 4730-01-423-7644 | Tube To Hose Elbow |
NSN 2510-01-433-3039 | Vehicular Door |
NSN 4820-01-434-7965 | Check Valve |
NSN 2590-01-446-8861 | Side Wear Strip |
NSN 2990-01-448-5295 | Exhaust Pipe Flange |
NSN 4720-01-453-7712 | Nonmetallic Hose Assembly |
NSN 2540-01-454-0552 | Air Circulating Ventilator |
NSN 6150-01-454-4676 | E Special Purpose Cable Assembly |
NSN 4820-01-456-2290 | Fluid Pressure Regulating Valve |
NSN 2990-01-456-2297 | Exhaust Muffler |
NSN 2930-01-456-2586 | Fluid Cooler Core Assembly |
NSN 4720-01-456-5665 | Nonmetallic Hose Assembly |
NSN 4720-01-456-5668 | Nonmetallic Hose Assembly |
NSN 6680-01-456-5760 | Liquid Level Gage Rod-cap |
NSN 2590-01-456-5802 | Vehicular Components Bracket |
NSN 2540-01-456-5807 | Air Conditioning-h Duct Assembly |
NSN 5930-01-456-6370 | Thermostatic Switch |
NSN 5945-01-456-6726 | Electromagnetic Relay |
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No requirement.
Code | Definition |
---|---|
FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
NS | New Surplus. New material item purchased from excess inventory. |
OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
SV | Serviceable product. |
AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
Part Number | RNVC | RNAAC | DAC | CAGE |
---|---|---|---|---|
ISO 7089-8-200HV-A2J | 2 | ZZ | 2 | I9008 |
Name | No. Items | |||
---|---|---|---|---|
[You must be logged in to use lists] |