change location
321-802-5889
321-733-7477
Model or part number: 6YY57
Riveting Burr NSN 5310-01-615-5433.
NSN 5310-01-615-5433 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4730-01-561-7756 | Hose Clamp |
| NSN 4910-01-582-3001 | Vehicular Maintenance Kit |
| NSN 5307-01-596-4887 | Plain Stud |
| NSN 5331-01-596-5022 | O-ring |
| NSN 6680-01-596-6468 | Liquid Level Gage Rod |
| NSN 4710-01-596-6473 | Metal Tube Assembly |
| NSN 5305-01-596-6477 | Machine Screw |
| NSN 5305-01-596-6479 | Machine Screw |
| NSN 5935-01-596-6485 | Electrical Plug Connector |
| NSN 2805-01-596-7334 | Crankcase |
| NSN 4730-01-596-7335 | Tube To Boss Straight Adapter |
| NSN 2805-01-596-7336 | Automatic Transmission Flexplate |
| NSN 4730-01-596-7339 | Flange To Hose Elbow |
| NSN 6150-01-596-7341 | E Special Purpose Cable Assembly |
| NSN 5365-01-596-7346 | Plate Spacer |
| NSN 2950-01-596-7348 | Non-air Engine Turbosupercharger |
| NSN 6620-01-596-7349 | Pressure Transmitter |
| NSN 5365-01-596-7352 | Machine Thread Plug |
| NSN 5306-01-596-7709 | Assembled Washer Bolt |
| NSN 5306-01-596-7718 | Assembled Washer Bolt |
| NSN 5306-01-596-7741 | Assembled Washer Bolt |
| NSN 5340-01-597-0718 | Multiple Angle Bracket |
| NSN 5310-01-597-0722 | Hexagon Plain Nut |
| NSN 5340-01-597-0726 | Mounting Plate |
| NSN 5365-01-597-0729 | Plate Spacer |
| NSN 5340-01-597-0746 | Multiple Angle Bracket |
| NSN 5340-01-597-0752 | Angle Bracket |
| NSN 5365-01-597-0758 | Plate Spacer |
| NSN 6145-01-597-1009 | Electrical Wire |
| NSN 6145-01-597-1186 | Electrical Wire |
| NSN 5340-01-597-1430 | Double Angle Bracket |
| NSN 5340-01-597-1431 | Retaining Bail |
| NSN 5340-01-597-1442 | Mounting Bracket |
| NSN 5306-01-597-1446 | Machine Bolt |
| NSN 5340-01-597-1834 | Angle Bracket |
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No requirement.
Washers Other Than Lock Washers, Iron Or Steel
Finished Metal Shapes
Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Not Threaded, Of Iron Or Steel
No special type of cargo code applicable.
Metal hardware.
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 6YY57 | 2 | ZZ | 5 | 25795 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||