5315-00-276-5908

Headless Grooved Pin email this page

Images

Reference images of this national stock number

Model or part number: 731092PC8

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Clevis Pin NSN 5315-00-276-5908.

NSN 5315-00-276-5908 Datasheet

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ

First End Style:

Chamfered

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

Between 1.193 inches and 1.198 inches

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ

Diameter:

Between 0.432 inches and 0.434 inches

MRC:

A measurement of the longest effective dimension of an item.ABNZ

Effective Length:

Between 1.015 inches and 1.025 inches

MRC:

None.ABPA

Undercut Diameter:

Between 0.410 inches and 0.414 inches

MRC:

None.ABPC

Undercut Width:

Between 0.028 inches and 0.031 inches

MRC:

None.AMCS

First End Taper Length:

0.031 inches

MRC:

Indicates whether or not the second end is identical to the first end.CQBB

Second End Relationship With First End:

Identical

MRC:

A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM

Hardness Rating:

40.0 rockwell c and 45.0 rockwell c

MRC:

Indicates the location of the first end.CRDY

First End Location:

Both ends

MRC:

None.CRMG

First End Taper Angle:

45.0 degrees

MRC:

Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM

Surface Finish:

32.0 microinches outside diameter

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel comp 8640

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Aisi assn standard single material response

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Phosphate

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC

Surface Treatment Specification:

Mil-p-16232, ty m, cl 1 military specification single treatment response

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Groove

MRC:

NIIN:

002765908

MRC:

NATO Stock Number:

5315-00-276-5908

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

MRC:

N/A

MIL-STD

MIL-P-16232 Spec.

FIIG:

A212A0

MRC:

INC:

02386

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5315-00-276-5908

A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 mm). Excludes rod, grooved, headless; shaft (as modified); and pin, vehicular leaf spring shackle.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

PRES MAT:

WRAP MAT:

ICQ:

000

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 20

Preservative coating only (with greaseproof wrap, as required).

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7318230000

NAICS:

332722

End Use Class:

12300

SITC:

69422

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7318230000

Rivets Of Iron Or Steel

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69422

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Not Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

095190

NMF Description:

Noi Hardware

UFC:

49790

LTL:

Rating variable

LCL:

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 10001

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
731092PC8	2	KZ	1	10001

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5315-00-276-5908

Images

Pricing & Availability

NSN 5315-00-276-5908 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »