5315-00-425-6441

Headless Grooved Pin email this page

Images

Reference images of this national stock number

Model or part number: D34796

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Clevis Pin NSN 5315-00-425-6441.

NSN 5315-00-425-6441 Datasheet

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ

First End Style:

Chamfered

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

4.375 inches

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ

Diameter:

Between 1.496 inches and 1.500 inches

MRC:

A measurement of the longest effective dimension of an item.ABNZ

Effective Length:

3.625 inches

MRC:

None.ABPA

Undercut Diameter:

Between 0.907 inches and 0.969 inches

MRC:

None.ABPC

Undercut Width:

Between 0.281 inches and 0.312 inches

MRC:

None.AMCS

First End Taper Length:

0.125 inches

MRC:

A measurement of the longest taper dimension at the second end,in distinction from width.AMFM

Second End Taper Length:

0.125 inches

MRC:

Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL

Features Provided:

Casehardened

MRC:

Indicates whether or not the second end is identical to the first end.CQBB

Second End Relationship With First End:

Identical

MRC:

A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM

Hardness Rating:

54.0 rockwell c and 60.0 rockwell c

MRC:

Indicates the location of the first end.CRDY

First End Location:

Both ends

MRC:

None.CRMG

First End Taper Angle:

Between 15.0 degrees and 45.0 degrees

MRC:

None.CTHC

Second End Taper Angle:

Between 15.0 degrees and 45.0 degrees

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Fed standard 66 sae 1045 federal standard single material response

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Groove

MRC:

NIIN:

004256441

MRC:

NATO Stock Number:

5315-00-425-6441

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A212A0

MRC:

INC:

02386

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5315-00-425-6441

A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 mm). Excludes rod, grooved, headless; shaft (as modified); and pin, vehicular leaf spring shackle.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

PRES MAT:

WRAP MAT:

ICQ:

016

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 20

Preservative coating only (with greaseproof wrap, as required).

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

7318230000

NAICS:

332722

End Use Class:

12300

SITC:

69422

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7318230000

Rivets Of Iron Or Steel

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69422

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Not Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

095190

NMF Description:

Noi Sub 9 Hardware

UFC:

49790

LTL:

70.0

LCL:

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 10988

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
D34796	2	PA	1	10988

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5315-00-425-6441

Images

Pricing & Availability

NSN 5315-00-425-6441 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »