NSN 5330-00-238-7383

Description: Gasket / Compressible Bead With Flange Seal email this page

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

Images

Reference images of this NSN
Picture of NSN 5330-00-238-7383 Picture of NSN 5330-00-238-7383
Description

Gasket NSN 5330-00-238-7383. Aph ms52000-1

pdf 5330-00-238-7383 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.172 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.875 inches and 0.891 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.875 inches and 0.891 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 0.500 inches and 0.516 inches
MRC:
None.ADPW
Outside Corner Radius:
0.141 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
0.594 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
0.594 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
0.140 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
0.140 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.026 inches and 0.036 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
75.0 shore barometer a and 85.0 shore barometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm D2000 2BC815C1E3 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
--
NIIN:
002387383
MRC:
--
NSN:
5330002387383
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
1 EA
MRC:
--
DEMIL:
No
MRC:
--
Hazmat:
Yes
MRC:
--
Repairability:
This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
FIIG:
--
FIIG:
A032A0
MRC:
--
INC:
04522
MRC:
--
IMM:
KZ

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

End Items and Platforms

End items to which this NSN is a component of.
  • Azimuth Surveying Instrument

Formal Definition

NSN 5330-00-238-7383

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

End Users MOE: Major organizational entities

Name
MOE Code Major organizational entity (MOE) code
MOE Rule A four position code that reflects management responsibility within participating military services, civil agencies, NATO and other foreign countries.
PICA A code indicating the principal supply control activity responsible for establishing stockage objectives, controlling stockage objectives and maintaining item accountability for an item of supply. Short title- pica. Formerly-wholesale inventory manager
DSOR Depot source of repair (DSOR) code to maintenance activity cross reference identifies those activities that are approved to perform depot level maintenance for the services.
User:
DEPARTMENT OF THE ARMY Department of the Army
MOE:
DA
Rule:
A919
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Department of the Air Force
MOE:
DF
Rule:
FXGI
PICA:
GX
DSOR:
User:
U.S. MARINE CORPS U.s. Marine Corps
MOE:
DM
Rule:
MC47
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Department of the Navy
MOE:
DN
Rule:
N9BZ
PICA:
GX
DSOR:
User:
MOROCCO Morocco
MOE:
YP
Rule:
YP01
PICA:
YP
DSOR:
User:
NEW ZEALAND New Zealand
MOE:
ZE
Rule:
ZE01
PICA:
ZE
DSOR:
User:
GERMANY Germany
MOE:
ZG
Rule:
ZG01
PICA:
ZG
DSOR:

Material & Special Handling

Hazmat, Precious Metals, Criticality, Enviroment, and ESD
HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
P
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
10
PKG:
27A0
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
194120
NMF Description:
Washers/gaskets/pckg Dvcs Noi
UFC:
95100
LTL:
Rating variable
LCL:
--
WCC:
596
TCC:
Z
SHC:
9
ADC:
A
ACC:
V

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 596

Gaskets, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Management

Management codes by department

Historical pricing for this NSN is between 0.84 and 0.93 USD.
Depending on quantity, availability, condition, lead time, and possible discontinuation of an item, we cannot guarantee pricing until we provide you an up to date quote.

Department Of The Army

SOS: SMS
AAC: J
SLC: 0
CIIC: U
REC REP CODE: Z
MGMT CTL: T2200X-
USC: A
REC REP CODE DESC: THIS IS A NONREPARABLE ITEM. IF CONDEMNED OR ECONOMICALLY UNSERVICEABLE, THEN DISPOSE AT THE LEVEL AUTHORIZED REPLACE THE ITEM.

Department Of The Air Force

SOS: SMS
AAC: J
SLC: 0
CIIC: U
REC REP CODE: N
MGMT CTL: SF9SX-N
USC: F
REC REP CODE DESC:

U.s. Marine Corps

SOS: SMS
AAC: J
SLC: 0
CIIC: U
REC REP CODE: Z
MGMT CTL: 10B2---
USC: M
REC REP CODE DESC: THIS IS A NONREPARABLE ITEM. IF CONDEMNED OR ECONOMICALLY UNSERVICEABLE, THEN DISPOSE AT THE LEVEL AUTHORIZED REPLACE THE ITEM.

Department Of The Navy

SOS: SMS
AAC: J
SLC: 0
CIIC: U
REC REP CODE:
MGMT CTL: 9B-----
USC: N
REC REP CODE DESC:

Defense Logistics Agency

SOS: SMS
AAC: J
SLC: 0
CIIC: U
REC REP CODE: N
MGMT CTL: -------
USC: I
REC REP CODE DESC:

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide