5330-00-891-6023

Gasket email this page

Images

Reference images of this national stock number
Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023 Reference of NSN 5330-00-891-6023

Model or part number: 40181

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Compressible Bead With Flange Seal NSN 5330-00-891-6023.

pdf NSN 5330-00-891-6023 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and synthetic rubber
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.289 inches and 0.296 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 350.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
Between 4.151 inches and 4.161 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.956 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
3.296 inches
MRC:
None.ADPW
Outside Corner Radius:
0.400 inches
MRC:
None.ADVC
Side Radius From Gasket Center:
2.078 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.120 inches
MRC:
None.ADWF
Gage Ring Thickness:
0.080 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8
MRC:
The maximum pressure at which an item is rated to operate.CTQW
Maximum Pressure Rating:
94.0 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic and aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ls-53, fscm 71984 mfr ref 1st material response and qq-a-327, t6 federal specification 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
--
NIIN:
008916023
MRC:
--
NATO Stock Number:
5330-00-891-6023
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
MRC:
N/A
MIL-STD
FIIG:
--
FIIG:
A032A0
MRC:
--
INC:
04522
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5330-00-891-6023

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide