5330-00-948-7121

Gasket email this page

Images

Reference images of this national stock number
Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121 Reference of NSN 5330-00-948-7121

Model or part number: 32813-1

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Compressible Bead With Flange Seal NSN 5330-00-948-7121.

pdf NSN 5330-00-948-7121 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.138 inches and 0.168 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.970 inches and 2.030 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.850 inches and 1.910 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 1.480 inches and 1.500 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 1.240 inches and 1.260 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.250 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.625 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.300 inches and 0.330 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.172 inches and 0.202 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.032 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Gas turbine engine
MRC:
--
NIIN:
009487121
MRC:
--
NATO Stock Number:
5330-00-948-7121
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A032A0
MRC:
--
INC:
04522
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5330-00-948-7121

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
33
PKG:
46A0
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 33

Greaseproof-waterproof bag, sealed.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
194120
NMF Description:
Washers/gaskets/pckg Dvcs Noi Sub5
UFC:
95100
LTL:
125.0
LCL:
100.0
WCC:
596
TCC:
Z
SHC:
Z
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 596

Gaskets, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) Z

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide