5330-01-228-3483

Nonmetallic Special Shaped Section Seal email this page

Images

Reference images of this national stock number
Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483 Reference of NSN 5330-01-228-3483

Model or part number: 863T0070255-009

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Molding Rubber NSN 5330-01-228-3483.

pdf NSN 5330-01-228-3483 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
E shape
MRC:
The means used to attach the item.ABSX
Attachment Method:
Cemented
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 34.570 inches and 34.690 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 29.570 inches and 29.690 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.310 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.500 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
--
NIIN:
012283483
MRC:
--
NATO Stock Number:
5330-01-228-3483
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A032A0
MRC:
--
INC:
32847
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

End Items and Platforms

End items to which this NSN is a component of.

Formal Definition

Government issue definition of NSN 5330-01-228-3483

An item fabricated from nonmetallic special shaped section. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
3926904500
NAICS:
339991
End Use Class:
12770
SITC:
89399
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 3926904500

Gaskets, Washers & Other Seals

End Use Code 12770

Other Industrial Supplies

Standard Intl. Trade Class (SITC) 89399

Articles Of Plastics, N.e.s.

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
194130
NMF Description:
Washers/gaskets/maint I/c Eng
UFC:
95100
LTL:
Rating variable
LCL:
--
WCC:
596
TCC:
Z
SHC:
9
ADC:
A
ACC:
A

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 596

Gaskets, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) A

Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide