5330-01-349-4232

Nonmetallic Special Shaped Section Seal email this page

Images

Reference images of this national stock number

Model or part number: 8838-103

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
Interface critical loose part; continous operating tem 450 deg f maximum; part to seal exhaust duct-maximum pressure 1 psid air at 450 deg f with maximum with leakage of .05 scfm/ft maximum

Description

Molding Rubber NSN 5330-01-349-4232.

NSN 5330-01-349-4232 Datasheet

MRC:

The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR

Cross Sectional Shape:

Special

MRC:

A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE

Aperture Width:

Between 5.400 inches and 5.630 inches

MRC:

A measurement of the longest dimension of an aperture,in distinction from width.ADUF

Aperture Length:

9.095 inches

MRC:

The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.ADVK

Cross Section Inside Diameter:

0.590 inches

MRC:

A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN

Cross-sectional Height:

0.750 inches

MRC:

A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH

Cross-sectional Width:

0.870 inches

MRC:

The national stock number or the identification information of the end equipment for which the item is a part.AGAV

End Application:

B-2 tssp

MRC:

The structural characteristic of the item.CQCF

Construction:

One-piece

MRC:

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL

Criticality Code Justification:

Feat

MRC:

The name assigned to the item by the government agency or commercial organization controlling the design of the item.CXCY

Product Name:

Seal upper ats exhaust

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Rubber fluorosilicone class fq

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Mil-r-25988 military specification single material response

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Oval

MRC:

NIIN:

013494232

MRC:

NATO Stock Number:

5330-01-349-4232

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

MRC:

N/A

MIL-STD

MIL-R-25988 Spec.

FIIG:

A032A0

MRC:

INC:

32847

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5330-01-349-4232

An item fabricated from nonmetallic special shaped section. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

46A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 33

Greaseproof-waterproof bag, sealed.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

3926904500

NAICS:

339991

End Use Class:

12770

SITC:

89399

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 3926904500

Gaskets, Washers & Other Seals

End Use Code 12770

Other Industrial Supplies

Standard Intl. Trade Class (SITC) 89399

Articles Of Plastics, N.e.s.

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
8838-103	2	ZZ	A	11960
DAA3122P005-103	9	KZ	E	80378
8838-103	1	ZZ	A	3DBN7

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5330-01-349-4232

Images

Pricing & Availability

NSN 5330-01-349-4232 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Manufacturers

Compare Now »