5330-01-377-4619

Gasket email this page

Images

Reference images of this national stock number
Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619 Reference of NSN 5330-01-377-4619

Model or part number: 9003268-1

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Compressible Bead With Flange Seal NSN 5330-01-377-4619.

pdf NSN 5330-01-377-4619 Datasheet

MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.107 inches and 0.117 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.090 inches and 1.110 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.090 inches and 1.110 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 0.875 inches and 0.895 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
Between 0.802 inches and 0.822 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 0.802 inches and 0.822 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.134 inches and 0.154 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.134 inches and 0.154 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.026 inches and 0.037 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Pacer dawn
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
60.0 shore durometer a and 70.0 shore durometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber ethylene-propylene class epm
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-g-22050 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
--
NIIN:
013774619
MRC:
--
NATO Stock Number:
5330-01-377-4619
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
MRC:
N/A
MIL-STD
MIL-G-22050 Spec.
FIIG:
--
FIIG:
A032A0
MRC:
--
INC:
04522
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5330-01-377-4619

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide