5330-01-431-4342

Gasket email this page

Images

Reference images of this national stock number

Model or part number: 150-068-C-027-5

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
Access gasket. Bolt holes not equidistant along width.

Description

Compressible Bead With Flange Seal NSN 5330-01-431-4342.

NSN 5330-01-431-4342 Datasheet

MRC:

The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR

Cross Sectional Shape:

Solid single or composition

MRC:

The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB

Hole Diameter:

0.625 inches

MRC:

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP

Overall Length:

13.250 inches

MRC:

An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK

Overall Width:

10.375 inches

MRC:

A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ

Inside Corner Radius:

0.500 inches

MRC:

A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE

Aperture Width:

8.125 inches

MRC:

A measurement of the longest dimension of an aperture,in distinction from width.ADUF

Aperture Length:

11.000 inches

MRC:

A measurement of the center to center distance between the bolt holes along the length.ADUZ

Center To Center Distance Between Bolt Holes Along Length:

3.000 inches

MRC:

None.ADVD

Outside Edge To Bolt Hole Center Distance Along Width:

0.625 inches

MRC:

None.ADVE

Outside Edge To Bolt Hole Center Distance Along Length:

0.625 inches

MRC:

A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM

Cross-sectional Thickness:

0.125 inches

MRC:

The number of bolt holes provided on the item.AECS

Bolt Hole Quantity:

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Rubber butadiene-styrene class sbr and cotton

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Garlock style 19 mfr ref single material response

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Non-circular

MRC:

NIIN:

014314342

MRC:

NATO Stock Number:

5330-01-431-4342

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A032A0

MRC:

INC:

04522

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5330-01-431-4342

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

Recent Solicitations Most recent solicitations for NSN 5330-01-431-4342

End Date

Solicitation

Qty

Purchase Request

End Date:

2017-08-01

Solicitation:

SPE5EJ17T9836

Qty:

Purchase Request:

0069994607

End Date:

2017-07-10

Solicitation:

SPE5EJ17T9343

Qty:

Purchase Request:

0069710367

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

46A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 32

Type i, shelf life.

Method of Preservation (MOP) 33

Greaseproof-waterproof bag, sealed.

Cushion Material (CUSH) JB

Astm-d4727, domestic fiberboard used as a stiffener on both sides of item.

Preservation Material (PRES_MAT) 00

No requirement.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

194050

NMF Description:

Gaskets/rings Plumbing Fixtures

UFC:

78100

LTL:

70.0

LCL:

WCC:

596

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 596

Gaskets, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
150-068-C-027-5	2	ZZ	5	44SG8
150-068-C-027-5	9	ZZ	5	11839
150-068-C-027 ITEM 5	9	ZZ	A	11839
150-068-C-027-5	1	ZZ	5	57RT4

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5330-01-431-4342

Images

Pricing & Availability

NSN 5330-01-431-4342 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Recent Solicitations Most recent solicitations for NSN 5330-01-431-4342

Packaging & Dimensions

Packaging Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »