5330-01-504-9543

Nonmetallic Strip Seal email this page

Images

Reference images of this national stock number

Model or part number: 05855-475

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Door Seal NSN 5330-01-504-9543.

NSN 5330-01-504-9543 Datasheet

MRC:

The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR

Cross Sectional Shape:

Circular

MRC:

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH

Tempurature Rating:

-40.0 degrees fahrenheit and 180.0 degrees fahrenheit

MRC:

The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL

Cross Section Outside Diameter:

Between 0.562 inches and 0.637 inches

MRC:

The national stock number or the identification information of the end equipment for which the item is a part.AGAV

End Application:

MEDI-UM-TAC-TICA

MRC:

The structural characteristic of the item.CQCF

Construction:

One-piece

MRC:

The name assigned to the item by the government agency or commercial organization controlling the design of the item.CXCY

Product Name:

Gasket closure

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Rubber butadiene-acrylonitrile class nbr or rubber butadiene-styrene class sbr or rubber isobutylene-isoprene class iir or rubber chloroprene class cr or rubber polyacrylate class acm or rubber silicone class q or rubber polyisoprene natural class nr or rubber polysulfide class t

MRC:

Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL

Special Test Features:

Lgth 169.18 & 171.18 ; material is rubber per specification astm d2000 & m2bc407a14b14c12f17 per mil-r-3065

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Non-circular

MRC:

Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP

Supplementary Features:

Vulcanize or cement 100 percent of the cross section; butt or scarff joint; if scarf joint is used the length of skive not to exceed 1.25 in.

MRC:

The document designator of the specification or standard which established the item of supply.ZZZK

Specification Data:

94231-05855 manufacturers standard

MRC:

A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY

Reference Number Differentiating Characteristics:

Outer diameter & length

MRC:

NIIN:

015049543

MRC:

NATO Stock Number:

5330-01-504-9543

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A032A0

MRC:

INC:

36874

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5330-01-504-9543

An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber strip. For items with round cross sections see seal, nonmetallic round section. Excludes gasket and packing, preformed.

Recent Solicitations Most recent solicitations for NSN 5330-01-504-9543

End Date

Solicitation

Qty

Purchase Request

End Date:

2019-10-28

Solicitation:

SPE7L320T1302

Qty:

Purchase Request:

0082034658

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

46AZ

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 33

Greaseproof-waterproof bag, sealed.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

3926904500

NAICS:

339991

End Use Class:

12770

SITC:

89399

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 3926904500

Gaskets, Washers & Other Seals

End Use Code 12770

Other Industrial Supplies

Standard Intl. Trade Class (SITC) 89399

Articles Of Plastics, N.e.s.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

194090

NMF Description:

Washers/seals

UFC:

95100

LTL:

60.0

LCL:

WCC:

596

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 596

Gaskets, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
05855-475	1	ZZ	4	94231
3HA519	2	ZZ	4	45152
3HA519	2	ZZ	4	75Q65

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5330-01-504-9543

Images

Pricing & Availability

NSN 5330-01-504-9543 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Recent Solicitations Most recent solicitations for NSN 5330-01-504-9543

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »