5340-00-235-2370

Rod End Clevis email this page

Images

Reference images of this national stock number

Model or part number: 138544

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

Description

Rod End Yoke NSN 5340-00-235-2370.

NSN 5340-00-235-2370 Datasheet

MRC:

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF

Thread Direction:

Right-hand rod connection

MRC:

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA

Thread Length:

0.875 inches rod connection

MRC:

A measurement of the longest dimension of the shank,in distinction from width.AATR

Shank Length:

0.938 inches

MRC:

The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB

Hole Diameter:

Between 0.2505 inches and 0.2520 inches

MRC:

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE

Shank Diameter:

0.375 inches

MRC:

The distance measured in a straight line from the bottom to the top of an item.ABKW

Overall Height:

0.562 inches

MRC:

An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK

Overall Width:

0.562 inches

MRC:

None.ADWJ

Angle Height:

0.125 inches

MRC:

The distance laterally from tip to tip of the fork.AJSD

Fork Span Width:

0.312 inches

MRC:

None.AKYV

Distance From Pivot Pinhole Center To Rod Connection End:

1.688 inches

MRC:

None.AKYW

Fork Arm Thickness:

0.125 inches

MRC:

The measurement between specified points of the fork,in distinction from height.AKYX

Fork Depth:

0.625 inches

MRC:

A designation that is used for the purpose of general identification of the thread.CQJX

Thread Size:

0.375 inches rod connection

MRC:

None.CRMK

Angle:

45.0 degrees

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Steel

MRC:

The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL

Material Specification:

Qq-s-637 federal specification single material response

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Chromate

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Clevis

MRC:

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD

Thread Series Designator:

Unc rod connection

MRC:

NIIN:

002352370

MRC:

NATO Stock Number:

5340-00-235-2370

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A264A0

MRC:

INC:

03796

MRC:

IMM:

AX KZ

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5340-00-235-2370

A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. may include provisions for locking. see also yoke, universal joint and connector, rod end. For items specifically designed for aviation, see clevis, rod end, aviation.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

PRES MAT:

WRAP MAT:

ICQ:

XXX

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 42

Container, watervaporproof bag, sealed, container.

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

095190

NMF Description:

Noi Sub 9 Hardware

UFC:

49790

LTL:

70.0

LCL:

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.

Cage 24821

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
138544	2	HD	5	24821

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5340-00-235-2370

Images

Pricing & Availability

NSN 5340-00-235-2370 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Freight

Freight Codes Definitions:

Manufacturers

Compare Now »