5340-00-872-4491

Angle Bracket email this page

Images

Reference images of this national stock number

Model or part number: 114L2384-1

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
Cutaway located on the sides of second leg,next to angle,0.250 in. Radius

Description

Engine Cover Bracket NSN 5340-00-872-4491.

NSN 5340-00-872-4491 Datasheet

MRC:

A measurement of the longest dimension of the first leg, in distinction from width.ADLK

First Leg Length:

Between 0.990 inches and 1.010 inches

MRC:

A measurement of the longest dimension of the second leg, in distinction from width.ADLL

Second Leg Length:

Between 0.990 inches and 1.010 inches

MRC:

None.AHLF

Second Leg Width:

1.290 inches

MRC:

None.AHLK

First Leg Hole Diameter:

Between 0.365 inches and 0.385 inches

MRC:

None.AHLN

Second Leg Hole Diameter:

Between 0.183 inches and 0.203 inches

MRC:

None.AHLP

Second Leg Distance Between Hole Centers Along Width:

Between 0.620 inches and 0.630 inches

MRC:

None.AHLV

Second Leg Distance From Edge To Hole Center Along Width:

Between 0.327 inches and 0.347 inches

MRC:

None.AHLW

Second Leg Distance From Edge To Hole Center Along Length:

Between 0.365 inches and 0.385 inches

MRC:

A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW

First Leg Thickness:

Between 0.053 inches and 0.073 inches

MRC:

A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX

Second Leg Thickness:

Between 0.053 inches and 0.073 inches

MRC:

None.AHQN

First Leg Width:

Between 0.890 inches and 0.910 inches

MRC:

None.AHRA

First Leg Distance From Edge To Hole Center Along Width:

Between 0.440 inches and 0.460 inches

MRC:

None.AHRB

First Leg Distance From Edge To Hole Center Along Length:

Between 0.330 inches and 0.350 inches

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU

First Leg Style:

Square

MRC:

The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU

First Leg Hole Arrangement Style:

One hole

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU

Second Leg Style:

Square

MRC:

The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU

Second Leg Hole Arrangement Style:

Two holes

MRC:

An indication of whether or not the second leg is identical to the first leg.CSSP

Second Leg Relationship To First Leg:

Not identical

MRC:

None.CSSQ

First Leg Angle:

90.0 degrees

MRC:

A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT

Heat Treatment:

T-4 solution heat treated

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Aluminum

MRC:

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT

Surface Treatment:

Anodize

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Angle

MRC:

NIIN:

008724491

MRC:

NATO Stock Number:

5340-00-872-4491

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A042A0

MRC:

INC:

16900

MRC:

IMM:

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Formal Definition

Government issue definition of NSN 5340-00-872-4491

A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes brace (as modified); bracket (1), mounting; and bracket, shelf.

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

27A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

8302500000

NAICS:

337127

End Use Class:

41050

SITC:

69919

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8302500000

Racks, Hat Pegs, Brackets and Similar Fixtures, and Parts Thereof, Of Base Metal Hat

End Use Code 41050

Cell Phones and Other Household Goods, N.e.c.

Standard Intl. Trade Class (SITC) 69919

Mountings, Fittings and Similar Articles, N.e.s., Of Base Metal; Hat Racks and Pegs, Brackets, Etc., Of Base Metal; Base Metal Automatic Door Closures

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

013120

NMF Description:

Aluminum Article Noi Sub 6

UFC:

05380

LTL:

100.0

LCL:

100.0

WCC:

576

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 576

Metal and metal products, nos, (less than 35 feet).

Air Commodity (ACC) A

Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Aviation Supply Chain

10/15	11/15	12/15	01/16	02/16	03/16	04/16	05/16	06/16	07/16	08/16	09/16	10/16	11/16	12/16	01/17	02/17	03/17	04/17	05/17	06/17	07/17	08/17	09/17	03/17	04/17	05/17	06/17	07/17	08/17	09/17	10/17	11/17	12/17	01/18	02/18	03/18	04/18	05/18	06/18	07/18	08/18	09/18	10/18	11/18	12/18	01/19
1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00

Manufacturers

This NSN is registered to the following cage codes.

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
114L2384-1	2	CT	1	77272
114L2384-1	2	XX	X	81205

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

5340-00-872-4491

Images

Pricing & Availability

NSN 5340-00-872-4491 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

Formal Definition

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

DLA History / Forecast Quantities

Manufacturers

Compare Now »