Model or part number: 10941090-1
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
NSN | Component Description |
---|---|
NSN 5342-00-088-1962 | Pressure Fluid Filter Bracket |
NSN 1015-00-088-1967 | Bracket Power Pack |
NSN 2590-00-088-1970 | Control Turret Retainer |
NSN 1015-00-088-2005 | Turret Control Support |
NSN 5995-00-088-2322 | Branched Wiring Harness |
NSN 1015-00-088-2520 | Turret Guard |
NSN 1015-00-088-2538 | Controller Unit M Plate Assembly |
NSN 5342-00-088-2558 | Turret Control Bracket |
NSN 1015-00-088-2573 | Lead And Diode Assembly |
NSN 5995-00-088-2578 | Branched Wiring Harness |
NSN 5342-00-088-2725 | Turret Control Bracket |
NSN 2590-00-088-2727 | Turret Control Bracket |
NSN 5995-00-088-2728 | Branched Wiring Harness |
NSN 1015-00-088-3805 | Turret Traversing Servo Valve |
NSN 5342-00-088-3981 | Engine Accessory Bracket |
NSN 5340-00-100-4092 | Manual Control Lever |
NSN 2590-00-102-9926 | Stowage Tray Screen |
NSN 2590-00-133-8094 | Instrument Panel |
NSN 2590-00-167-8502 | Protective Turret Screen |
NSN 2590-00-168-2765 | Ammunition Stowage Rack |
NSN 8140-00-168-2768 | Ammunition Box |
NSN 2520-00-169-5717 | Hand Elevation Control |
NSN 2520-00-177-9240 | Hydraulic Valve Body |
NSN 1015-00-178-0204 | Turret Slipring Shield |
NSN 2530-00-204-9906 | Air-hydraulic Brake Sl Parts Kit |
NSN 5342-00-221-4816 | Slipring Switch Bracket |
NSN 2940-00-226-2552 | Air Cleaner Cap Assembly |
NSN 5340-00-226-2658 | Mounting Bracket |
NSN 2510-00-256-5531 | Fender Brace |
NSN 4320-00-285-3756 | Manual Inflating Pump |
NSN 2530-00-402-5183 | Driving-nondriving Wheel Spindle |
NSN 1015-00-445-9154 | Ammunition Box Cover |
NSN 2590-00-457-0307 | Rod-lever Accelerator |
NSN 2590-00-457-0308 | Rod-lever Accelerator |
NSN 3040-00-570-9701 | Mechanical Drive Housing |
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Unheated general purpose.
Physical protection.
No special type of cargo code applicable.
Metal hardware.
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
Code | Definition |
---|---|
FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
NS | New Surplus. New material item purchased from excess inventory. |
OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
SV | Serviceable product. |
AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
Part Number | RNVC | RNAAC | DAC | CAGE |
---|---|---|---|---|
10941090-1 | 2 | AZ | 1 | 19207 |
Name | No. Items | |||
---|---|---|---|---|
[You must be logged in to use lists] |